flexi SCRATCHY

SCRATCHY

The set contains several parts.You can print the whole thing at once. For this purpose the finished object is used (do not switch on the supports because they will get into the tentacles). Here you can use only manual supports.

Or I recommend to print individually with each tentacle of a different color.
The head of the cat is also modified to insert the tentacles from the bottom.

There is an extra gap so that everything fits together. The tentacles are immediately after printing very flexible and strong

If anyone has a problem with the adhesion of tentacles to the substrate I have added a modified tentacles object which contains several sticks.
I recommend to have the first layer adjusted, which mainly must not be overly printed under pressure and stretched wide !

............................
hamster
https://cults3d.com/en/3d-model/art/fllexi-mr-humster-bionicfactory

https://cults3d.com/en/3d-model/art/angry-snowbird-flexi

I recommend printing the head to the highest quality, ideally 0.1 mm layer.For the tentacles, a layer of 0.2 mm is sufficient.

turn on the supports only when printing the head itself, but never turn on the supports for the tentacles !!

0.1 mm layer height head (here turn on suport )
0.2 mm for tentacle
24 % infill
2 walls
0,4 mm nozzle
material PLA or PETG
overall width of the mascot is 128 mm