GNM-60 Special Forces Mortar for TAGInn 40mm Grenades

Die Bastelkammer offers here the GNM-60 special forces mortar for 40 mm TAGinn grenades.

This model is a replica of the GNM-60. The original one is a 60mm noise reduced mortar designed for special forces and tactical groups for concealed operations. It allows troops to fire while maintaining concealment. The weapon can beoperated by a single individual. The original mortar is made by STCDelta.

The assembly of this 60 mm GNM-60 mortar kit does not require any special knowledge. It is a starter kit that already comes with detailed instructions. Together with the accompanying 60 mm launching grenade, all types of 40 mm TAGinn grenades can be fired from the mortar. For this purpose, the 40 mm TAGinn shells are used in the 60 mm launching grenade. In addition to TAGinn shells, APS Hell Fire CO2 shells with a tailored TAGinn Launchtube can also be used (A corresponding Launchtube is available here: https://cults3d.com/en/3d-model/various/taginn-launch-tube-for-aps-hell-fire ).

The print files provided here include the necessary STL files for printing the mortar and the 60 mm mortar launching grenade.

List of components needed to assemble the kit:

3D printed parts

1 piece of 65x2,5x210 mm aluminum tube (for Mortar)

1 piece of 28x2x185 mm aluminum tube (for Launch Grenade)

1 pieces M5x30 mm hexagon screw

1 piece M8x50 Cylindric flat head screw (for flat screwdriver)

1 piece M5x12 Cylindric head screw

2 pieces M8 hexagon nuts

1 piece M8x15 grub screw (as Firing pin)

1 pieces washer for M5

1 piece 5x195 mm aluminum round profile (for Launch Grenade)

1 piece 3x28 mm steel wire

1 piece 9.5x25 mm spirit level

Epoxy or plastic glue

Griptape (if needed)

Varnish

NOTES:

Depending on the tolerances of your printer, it may be necessary to sandpaper some parts.

Follow us at https://diebastelkammer.wordpress.com

Safety Precautions.

Die Bastelkammer assumes no responsibility for the misuse, misconduct or damage caused to yourself or others by any of the products we have made available for download. This model is designed exclusively for the sport of airsoft. Please observe the laws in your own country.

These model is subject to the terms of the CULTS website and are intended for private use only. Any reproduction for commercial purposes is prohibited, i.e. the sale of the model, a derived or printed version.

Layer height: 0.2 mm

Wall thickness: 3 mm

Filling: 50% (minimum)

Material: PLA+ (or any other durable material like

                            BigRep ProHT)