Mandalorian Season 2 Speeder bike

Legal stuff:

BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:
The files are for private use only!
You are allowed to print parts from them for your personal use only!
You are not allowed to use this files or parts you printed with the use of this files of it in any comercial way!
If you are distributing Pictures from parts or models you build with theses files you are only allowed to to so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your Fotos!
You are not allowed to copy or distribute them in any way!
You are not allowed to sell them or parts you printed from them or models you build with the use of this files!

DESCRIPTION:

"Not too shabby, eh!"
"This ain´t Corellia!"(Toro Calican)

Get Ready for The Mandalorian Season 2

This is a fan sculpt of the swoop bike / speeder bike from the Series "The Mandalorian" as see on the Teaser Pictures of Season 2.
In fact I think it´s the exact same design as the bike that Toro Calican rides in Episode 5 of Season one. But I added a open backpack so that you Can place Baby Yoda / The child in it as seen on the Teasers. Fits the small child for the 6" figures exactly.

If you want to have a exact repicla of Toro Calicans bike print the closed bag two times for both sides.

Add two thin wires between the small holes of the steering head and the main Body as seen in the Pictures, as this Little Detail can´t be printed.

Scaled for 6" Black Series Action Figures from Hasbro.
On the left side I added a small hole in the seat to hold the rifle. (see Pictures)
If you want to use it for 3.75" Figures scale all parts down to 60%
For Legion scale it down to 30%, but I´m not sure if all Details are printed.

The model on the Fotos was printed for 6", in medium Quality (0.2 layers) For smaler prints I recommend to print it in High Quality (0.1 layers)

Print time was approximately 10 Hours.

-