Star Girls 2 - Family - by SPARX

Second of the Star Wars girls Queen Padme Amidala Skywalker, mother of Princess Leia, or Leia Skywalker.This model was delayed for Mothers Day in UK but still in time for any Star Wars fans when coupled with Star Girls 1 Family .
The two models are too large to upload as a complete diorama and as they come with separate bases and individual posed arms to create a stand alone model, they are offered in this split format.

There is an NSFW Add-Ons body pack, available from this website
Star Girls 1 and 2 addons- by SPARX . .
https://cults3d.com/en/3d-model/naughties/star-girls-1-2-adult-add-ons-only-by-sparx

as well as the Princess Leia Daughter model to complete your “Family” Diorama
Star Girls 1 Family - by SPARX
https://cults3d.com/en/3d-model/art/star-girls-1-family-by-sparx

The torso’ and head parts are removable and interchangeable with magnets (see pics) The
The parts are interchangeable with the other torso’s and parts available in both of the add-ons above to create what model you wish . .have fun.

Natalie Portman is 160cm so body of model is 266mm at 1/6th Scale
Model with heels and Blaster on Base is total 348mm

1 upper torso
2 Right Arm with E5 Blaster Covered and 1 with no sleeve
2 Right Arm with ELG 3A Pistol Covered and 1 with no sleeve
1 Left Arm for Stand alone model
1 Left Arm and Leia Left Hand for Diorama (linking)

1 Lower Torso Pants
1 pair of boots = 2 x boots
2 heads (and head pin)

Base Parts;
1 x Base

14 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS
TIPS:
Resin Printing;
Hollow 2.40 Raft 100%
Lower Torso’s, Upper Torso’s, Heads, Boots
DO NOT Hollow
Arms or Hands

FDM
ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint parts for both figures separate before joining.
Paint boots before fixing to lower torso.