CAMEL CAKE CUTTER 12 CM HIGH – THE EPIPHANY CAKE

Puff pastry cake cutter, It is a traditional sweet of the Epiphany of the city of Varese (Italy).
During cooking (approx. 15/20 min) the cake will rise and will have the shape of a camel.
The camel is 12 cm high, so you get an individual cake
and each person will have one (or more) according to personal tastes.
Before baking, spread delicately with honey and sprinkle the shape of puff pastry with icing sugar to create a crunchy caramelized crust.
Do not exceed neither with honey nor with icing sugar otherwise the cake will stick to the paper oven below.
This cute camel-shaped cake cutter is preferable to make it in PETG but also in PLA you can safely print
Attached are both the .STL file and the .GCODE file
the .GCODE is preset for PETG printing, so if you prefer to print in PLA you will need to create a special .GCODE with the temperature configuration suitable for PLA.
The thickness of each printing layer is 0.3 mm
To those who appreciate creative novelties I wish good prints and good cakes.
P.S. : evaluate the possibility (recommended) of an anchor raft in at least two layers, especially in the case of PETG printing, which tends to shrink, rising from the printing bed !

layer thickness 0.3 mm
for PETG : bed 65 °C - Extruder 235 °C