Point counter

An universal point counter. It can be assembled of several modular components to create a long one way point counter or to create a circular one.
LONG ONE WAY POINT COUNTER: In this case you need to 3d print: 1x L.start, 1x L.end and a chosen number of L.main (if the maximum value is supposed to be 50 points, then print 3x L.main).
CIRCULAR POINT COUNTER: In this case you need to 3d print 4x L.turn and the chosen number of L.main (if the maximum value is supposed to be 100 points, then print 6x L.main).

This point counter is designed for 1 x 1 x 1 cm cube that is used in Prosperity board game, but you can also 3d print one (I don't attach cube stl file, because I don't want to offend anybody ;) ).

Slots for x x5 are slightly higher and x x10 are much higher than most of the slots in the point counter. This help to visually recognize "miles stones" during the play. You can also write numbers there or put stickers with printed numbers.

I like Prosperity board game very very much. The point counter there is extremely annoying. So I have invented this one. There are some other board games with a terrible point counters, there are some with no point counter. This 3d printed models can help with that.

Some photos in higher resolution:
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6

All items were 3Dprinted on Prusa MK3:
- in PLA (F3D Gold pearl),
- No support is needed,
- Infill 20% rectilinear.
I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.

Printing Time of 2 items: 1h2'