Life Counter (MTG, etc)
$2.50 Life Counter (MTG, etc)
3D
Published 2022-04-11T09:34:42+00:00
A life Counter design for CCG games. This Life Counter has the same dimensions in width and height as MTG trading cards (with sleeves), and can be packed away with your decks. It can count from 0 to 99, and is quick and easy to use.
All files have been checked with PrusaSlicer (Netfabb) and are in the correct orientation for printing.
This should be an easy print. If you can print the deck box, then the life counter should be no problem.
Print one of each of these:
• Life Counter_Base.stl
• Life Counter_Counters.stl
• Life Counter_Rods.stl
• Life Counter_Top Deck.stl
This will give you a Life Counter with inset numbers. I'd recommend printing the counters in a different colour to the base/top deck.
Then, simply slide 9 of the counters onto each rod (with the raised ridges all facing the same way), drop the rods into the base, and clip the top deck onto the base. Tolerances are all fairly relaxed. If you have problems with counters sticking, then back off your flow/extrusion multiplier a bit. If they are too loose, then increase your extrusion/flow slightly.
A note regarding this file:
• Life Counter_Numbers.stl
This file is for people who have printers with multi-material capability. The Numbers file and the the Top Deck file are intended to be sliced together if you want the numbers in a different colour (like my photos).
| Date published | 11/04/2022 |
| Price | $2.50 |
| Support Free | YES |