Universal tilt Tablet Stand

The tablet stand for 7"- 8" tablets is easy adjustable via raster from 120mm to 150mm.

Check out the video

I have printed it with PLA nozzle_diameter = 0.4 layer_height = 0.3 perimeters = 3 bottom_solid_layers = 3 top_solid_layers = 3 fill_density = 20%.

There are mounts for 9,10,11 and 12 mm thick tablets. For 9mm tablets for example you need to print two pieces from holder_top_9mm.stl and two pieces from holder_bottom_9mm.stl.

You can use it on the table with the tilt stand.

You can use it in your car.

Or you can screw it to the wall.