Skip to content

Schneider GRUNAU BABY IIb R/C vintage glider wingspan 2000mm

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 7.2k views
  • 13 likes
  • 16 downloads
  • 2 collections
  • 1 make
License
3D design format
STL and ZIP Folder details Close
  • Gcode.zip
    • ail/AA8P_ail_L01.gcode
    • ail/AA8P_ail_L02.gcode
    • ail/AA8P_ail_L03.gcode
    • ail/AA8P_ail_L04.gcode
    • ail/AA8P_ail_L05.gcode
    • ail/AA8P_ail_L06.gcode
    • ail/AA8P_ail_R01.gcode
    • ail/AA8P_ail_R02.gcode
    • ail/AA8P_ail_R03.gcode
    • ail/AA8P_ail_R04.gcode
    • ail/AA8P_ail_R05.gcode
    • ail/AA8P_ail_R06.gcode
    • fuse/AA8P_canopy01.gcode
    • fuse/AA8P_canopy02.gcode
    • fuse/AA8P_fuse01.gcode
    • fuse/AA8P_fuse02.gcode
    • fuse/AA8P_fuse03.gcode
    • fuse/AA8P_fuse04.gcode
    • fuse/AA8P_fuse05A.gcode
    • fuse/AA8P_fuse05B.gcode
    • fuse/AA8P_fuse06.gcode
    • fuse/AA8P_fuse07A.gcode
    • fuse/AA8P_fuse07B.gcode
    • fuse/AA8P_fuse08.gcode
    • fuse/AA8P_fuse09.gcode
    • fuse/AA8P_fuse10.gcode
    • fuse/AA8P_fuse11.gcode
    • fuse/AA8P_fuse12.gcode
    • fuse/AA8P_fuse13.gcode
    • fuse/AA8P_mainservotray.gcode
    • fuse/AA8P_motormount.gcode
    • fuse/AA8P_skid.gcode
    • fuse/AA8P_skidmount.gcode
    • fuse/AA8P_windshield.gcode
    • parts/AA8P_ailhorn.gcode
    • parts/AA8P_canopylock_LR.gcode
    • parts/AA8P_latch.gcode
    • parts/AA8P_latch_horn.gcode
    • parts/AA8P_latch_LR.gcode
    • parts/AA8P_link_cover_L.gcode
    • parts/AA8P_link_cover_L01.gcode
    • parts/AA8P_link_cover_R.gcode
    • parts/AA8P_strutmount.gcode
    • parts/AA8P_wingcen_cover_cen.gcode
    • parts/AA8P_wingcen_cover_LR.gcode
    • parts/AA8P_wingjoiner_F01.gcode
    • parts/link_horn.gcode
    • parts/link_horn_R.gcode
    • parts/link_mount.gcode
    • parts/link_mount_R.gcode
    • parts/strut_L.gcode
    • parts/wingcover_hinge.gcode
    • stab/AA8P_EL_L02.gcode
    • stab/AA8P_EL_L03.gcode
    • stab/AA8P_EL_LR01.gcode
    • stab/AA8P_EL_mount_A.gcode
    • stab/AA8P_EL_mount_AB.gcode
    • stab/AA8P_EL_mount_B.gcode
    • stab/AA8P_EL_R02.gcode
    • stab/AA8P_EL_R03.gcode
    • stab/AA8P_rudder01.gcode
    • stab/AA8P_rudder02.gcode
    • stab/AA8P_rudder03.gcode
    • stab/AA8P_stab_h_cen.gcode
    • stab/AA8P_stab_h_L01.gcode
    • stab/AA8P_stab_h_L02.gcode
    • stab/AA8P_stab_h_LR03.gcode
    • stab/AA8P_stab_h_R01.gcode
    • stab/AA8P_stab_h_R02.gcode
    • wing/AA8P_link_cover_fit.gcode
    • wing/AA8P_link_cover_L.gcode
    • wing/AA8P_link_cover_R.gcode
    • wing/AA8P_spoil_hinge.gcode
    • wing/AA8P_spolier_L01.gcode
    • wing/AA8P_spolier_L02.gcode
    • wing/AA8P_spolier_L03.gcode
    • wing/AA8P_spolier_link_fit.gcode
    • wing/AA8P_spolier_R01.gcode
    • wing/AA8P_spolier_R02.gcode
    • wing/AA8P_spolier_R03.gcode
    • wing/AA8P_wingcen_cover_cen.gcode
    • wing/AA8P_wing_L01.gcode
    • wing/AA8P_wing_L02.gcode
    • wing/AA8P_wing_L03.gcode
    • wing/AA8P_wing_L04.gcode
    • wing/AA8P_wing_L05.gcode
    • wing/AA8P_wing_L06.gcode
    • wing/AA8P_wing_L07.gcode
    • wing/AA8P_wing_L08.gcode
    • wing/AA8P_wing_L09.gcode
    • wing/AA8P_wing_L10.gcode
    • wing/AA8P_wing_R01.gcode
    • wing/AA8P_wing_R02.gcode
    • wing/AA8P_wing_R03.gcode
    • wing/AA8P_wing_R04.gcode
    • wing/AA8P_wing_R05.gcode
    • wing/AA8P_wing_R06.gcode
    • wing/AA8P_wing_R07.gcode
    • wing/AA8P_wing_R08.gcode
    • wing/AA8P_wing_R09.gcode
    • wing/AA8P_wing_R10.gcode
    • wing/cen_cover_hinge.gcode
    • wing/parts_A.gcode
    • wing/parts_B.gcode
    • wing/parts_C.gcode
  • MANUAL(221211).zip
    • parameter(221211).pdf
    • MANUAL(221211).pdf
  • STL_UP.zip
    • ail/ail_horn_L.stl
    • ail/ail_horn_R.stl
    • ail/ail_L01.stl
    • ail/ail_L02.stl
    • ail/ail_L03.stl
    • ail/ail_L04.stl
    • ail/ail_L05.stl
    • ail/ail_L06.stl
    • ail/ail_R01.stl
    • ail/ail_R02.stl
    • ail/ail_R03.stl
    • ail/ail_R04.stl
    • ail/ail_R05.stl
    • ail/ail_R06.stl
    • fuse/canopy01.stl
    • fuse/canopy02.stl
    • fuse/canopylock_L.stl
    • fuse/canopylock_R.stl
    • fuse/fuse01.stl
    • fuse/fuse01_glider.stl
    • fuse/fuse02.stl
    • fuse/fuse03.stl
    • fuse/fuse04.stl
    • fuse/fuse05A.stl
    • fuse/fuse05B.stl
    • fuse/fuse06.stl
    • fuse/fuse07.stl
    • fuse/fuse07B.stl
    • fuse/fuse08.stl
    • fuse/fuse09.stl
    • fuse/fuse10.stl
    • fuse/fuse11.stl
    • fuse/fuse12.stl
    • fuse/FUSE13.stl
    • fuse/latch.stl
    • fuse/latch_L.stl
    • fuse/latch_R.stl
    • fuse/motormount.stl
    • fuse/skidmount_L.stl
    • fuse/skidmount_R.stl
    • fuse/skidrubber1.stl
    • fuse/skidrubber2.stl
    • fuse/skid_L.stl
    • fuse/skid_R.stl
    • fuse/windshield.stl
    • parts/Battery_strap_holder.stl
    • parts/mainservotray.stl
    • stab_h/EL_L01.stl
    • stab_h/EL_L02.stl
    • stab_h/EL_L03.stl
    • stab_h/EL_mount_A.stl
    • stab_h/EL_mount_B.stl
    • stab_h/EL_R01.stl
    • stab_h/EL_R02.stl
    • stab_h/EL_R03.stl
    • stab_h/horn_EL.stl
    • stab_h/stab_h_cen.stl
    • stab_h/stab_h_L01.stl
    • stab_h/stab_h_L02.stl
    • stab_h/stab_h_L03.stl
    • stab_h/stab_h_R01.stl
    • stab_h/stab_h_R02.stl
    • stab_h/stab_h_R03.stl
    • stab_v/horn_Rudder.stl
    • stab_v/rudder01.stl
    • stab_v/rudder02.stl
    • wing_center/centerservo_horn.stl
    • wing_center/servotray_cen_front.stl
    • wing_center/servotray_cen_rear.stl
    • wing_center/wingcen_boltmount_L.stl
    • wing_center/wingcen_boltmount_R.stl
    • wing_center/wingcen_cover_01.stl
    • wing_center/wingcen_cover_02.stl
    • wing_center/wingcen_cover_hingeA.stl
    • wing_center/wingcen_cover_hingeB.stl
    • wing_center/wingcen_cover_hingeC.stl
    • wing_center/wingcen_cover_L.stl
    • wing_center/wingcen_cover_R.stl
    • wing_center/wingcon_L_FRONT.stl
    • wing_center/wingcon_L_REAR.stl
    • wing_center/wingcon_R_FRONT.stl
    • wing_center/wingcon_R_REAR.stl
    • wing_center/wingjoiner_F01_bot.stl
    • wing_center/wingjoiner_F01_top.stl
    • wing_center/wingjoiner_Rear_bot.stl
    • wing_center/wingjoiner_Rear_top.stl
    • wing_L/link_cover_L.stl
    • wing_L/link_horn_bot.stl
    • wing_L/link_horn_top.stl
    • wing_L/link_mount_bot.stl
    • wing_L/link_mount_top.stl
    • wing_L/spoil_hinge01.stl
    • wing_L/spoil_hinge02.stl
    • wing_L/spoil_hinge03.stl
    • wing_L/spoil_hinge04.stl
    • wing_L/spolier_L01.stl
    • wing_L/spolier_L02.stl
    • wing_L/spolier_L03.stl
    • wing_L/spolier_link_fit.stl
    • wing_L/strutmount_A_L.stl
    • wing_L/strutmount_w_L.stl
    • wing_L/wingstrut_joint_L.stl
    • wing_L/wingstrut_LA.stl
    • wing_L/wingstrut_LA_short01.stl
    • wing_L/wingstrut_LA_short02.stl
    • wing_L/wingstrut_LB.stl
    • wing_L/wingstrut_LB_short01.stl
    • wing_L/wingstrut_LB_short02.stl
    • wing_L/wingstrut_LB_short03.stl
    • wing_L/wing_L01.stl
    • wing_L/wing_L02.stl
    • wing_L/wing_L03.stl
    • wing_L/wing_L04.stl
    • wing_L/wing_L05.stl
    • wing_L/wing_L06.stl
    • wing_L/wing_L07.stl
    • wing_L/wing_L08.stl
    • wing_L/wing_L09.stl
    • wing_L/wing_L10.stl
    • wing_R/link_cover_R.stl
    • wing_R/spolier_R01.stl
    • wing_R/spolier_R02.stl
    • wing_R/spolier_R03.stl
    • wing_R/strutmount_A_R.stl
    • wing_R/strutmount_w_R.stl
    • wing_R/wingstrut_joint_R.stl
    • wing_R/wingstrut_RA.stl
    • wing_R/wingstrut_RA_short01.stl
    • wing_R/wingstrut_RA_short02.stl
    • wing_R/wingstrut_RB.stl
    • wing_R/wingstrut_RB_short01.stl
    • wing_R/wingstrut_RB_short02.stl
    • wing_R/wingstrut_RB_short03.stl
    • wing_R/wing_R01.stl
    • wing_R/wing_R02.stl
    • wing_R/wing_R03.stl
    • wing_R/wing_R04.stl
    • wing_R/wing_R05.stl
    • wing_R/wing_R06.stl
    • wing_R/wing_R07.stl
    • wing_R/wing_R08.stl
    • wing_R/wing_R09.stl
    • wing_R/wing_R10.stl
  • rudder03.stl

Learn more about the formats
Last update 2022-12-11 at 12:04
Publication date 2022-04-18 at 04:51
Design number 697472
rah3

rah3

3D printer file info

3D model description

UPDATE(221211)
- Added Missing STL(rudder03.stl)
- Edited parameters for some parts(wing02, el03, rudder02)

Flight Video

https://youtu.be/miaOwCbwmaA
https://youtu.be/KirAfJrFnb0

It is scale model of 1930's old vintage glider

Specification
- Wingspan : 2,000mm
- Length : 915mm
- Weight : 1,100 ~ 1,200g(ready to fly, include battery 2,200mah, after painting
- wing loading : 31g/dm2

This aircraft has precisely scaled the shape of the actual aircraft and has a wingspan of 2M.

The motorized version can easily gain altitude and then fly freely for long periods of time by updraft.

The main wing and the horizontal stabilizer are removable, so it is convenient for transport and storage in your vehicle.

precisely operated spoilers have a function that matches not only the appearances of the exterior, but also the actual operation of the aircraft.

The coupling parts of the main wing is integrated in the upper center of the fuselage, and is coupled in a similar way to the actual aircraft.

The ailerons of the main wing has a linkage rod and crank crossover operation structure by a single servo installed in the center of the upper part of the fuselage.

The surface of the main wing has meticulously reproduced the curves found in real aircraft or aircraft made of balsa wood and film.

This aircraft consists of a large number of parts. Meticulous and precise assembly skills and patience are required.

Take on the challenge for great results

flight video will be uploaded.

contact : rah66@hanmail.net

3D printing settings

More than 90% of parts are printed as LW-PLA.
Each parameters for parts are included in download filed with construction manual.

Also, included are G-CODEs for CURA, ready to print.

nozzle dia : 0.4mm
layer height : 0.2~0.25mm
temperature : 225~235℃
LW-PLA : 700g
PLA : 100g

Recommended or actually I used.

  1. Need your own R/C system
  2. 2212~2218 class stator body driven motor (900~1,100KV, 16*19 motor hole size)
  3. 3S~4S power system
  4. 40A ESC
  5. 12*6 folding prop with adaptor
  6. EMAX ES08MA servo *4PCS
  7. EMAX ES3004 servo 1PCS
  8. carbon pipe 8mm dia.*150mm(inner dia. 6mm)
  9. carbon pipe 6mm dia.x1,000mm *2PCS
  10. 1.2mm carbon rod x1,000mm *4PCS
  11. 1.0mm carbon rod or steel rod 20cm
  12. m2 bolts and nuts(6mm, 15mm, 20mm)
  13. other small parts for assembly like as linkage rod, clevis...

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.