The Graveyards Altar (scenery)
$1.99 The Graveyards Altar (scenery)
3D
Published 2022-04-20T20:15:47+00:00
The Graveyards Altar is a Ready to Print tabletop terrain Piece.
Prints with minimal supports (recommended support settings in Printing tips section)
Optimised for FDM printing
Contains;
- High-detail Terrain Piece
- The Altar as a Seperate Print
- A collection of objects from the design
Scaling
This piece is scaled for 28-32mm, but can be scaled up or down easily.
Dimensions: 130(x)x185(y)x100(z)mm
Model Settings
Mythic Miniatures recommends 3 Walls with 7-15% infill for the majority of our models, 3 walls provides the print with skin strength, while the infill is left to provide quick support for any top layers. This provides a strong and stable print that will be easily to paint and play with without fear of damage, while keeping material usage down.
Personally as a tabletop gamer, hobbiest, printing fiend, user of my own terrain, I prefer to print at a higher detail level and a slower print time, my personal settings are generally 0.08-0.16mm Layer height @60-75mm/s - regardless of print size, and printed on an Ender 5 Pro with various modifications.
Using these layer heights gives the piece an amazing skin and ensures that the painting process goes much smoother and faster and usually without requiring any sanding. The increase in print time is worth the reduction in painting difficulty (layer line effects) and increase of skin quality. I personally time my prints to fit my schedule; rather than print as fast as possible. So for example if a print is going to finish while I am at work, I will increase the quality via layer height reduction or speed, so that it finishes either when I get home or shortly after. This maximises quality for no cost.
Support Settings
Personally I recommend tree supports for terrain printing and the Mythic Miniatures designs. Tree supports work better I find as they often will be placed off the model and are easier to remove than classic supports.
Tree supports
0% density this ensures that only the outer rim of the support is printed - makng them easy to remove, but still resistive to printerhead collisions due to the shrinking shell shape they naturally take.
single line - again keeps them easy to remove (can be crushed between fingers to remove any that are trapped between printed parts)
| Date published | 20/04/2022 |
| Price | $1.99 |
| Dimensions | 130x185x100 |