Galaxy S5 Hard Case (Revised)

Prints (0)

Description

A hard case designed to fit the Samsung Galaxy S5. I designed this base for creating designer cases for a Samsung Galaxy S5 phone. I print my cases at 0.1 mm layer, Shell thickness 0.8, Bottom/ Top thickness 0.8 mm, With Supports, (ABS or PLA) Design samples that I have created using this model as the base are also supplied. Updates: 04/02/2014 - Shifted the locations of the power and volume button slots so they should be more centered on the buttons. Made the depth of the case a little shorter (i.e. from 11 mm to 10.95 mm). A Test print stl also included so that you can check the fit without wasting too much material. All Older .stl files can be found in the zip archive. 17/01/2014 - Uploaded two additional cases based on the base case. These two are also plain and hex patterned with the sides, top and bottom exposed for those who desire a minimalist type case. Giving total access to the power and volume buttons as well as removing the top edge that may interfere with user's ability to swipe.

Design Files

File Size

S5_rev4-3_Hex.stl
4.2 MB
Test__S5_rev4-3_.stl
1.04 MB
S5_rev4-3.stl
833 KB
Plain_S5corners.stl
843 KB
S5_rev4-3_Geo.stl
2.2 MB
Hex2_S5corners.stl
3.34 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×