Realistic Franc 1 coin as a coaster

This is a replica of a Franc 1 coin for use as a coaster. The diameter is 10.1 cm (3.9 inches).

You can use any filament color which you like for the Franc 1 coaster. The original color of the Franc coin is a silver color.

Let the design to be the upper side on your printer's build plate. The flat side is at the bottom.

The Franc 1 coin comes in 3 flavours.

Coin type A

Coin coaster with top design and flat bottom side with 3 holes for the rubber stoppers on the bottom side. This design is printed in one go. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type B

Coin coaster with top and bottom design. There are 3 holes for the rubber stoppers on the bottom side. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type C

Pure coin with top and bottom design without any holes on the bottom part. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other.

Enjoy printing these items.

0.2 mm initial layer height, 0.2 mm layer height. No supports required. 20 % infill. Nozzle not larger than 0.4 mm to print the fine details.

For detailed assembly instructions please visit https://www.thingiverse.com/thing:5355519