Skip to content

IMR-1

thumb.png IMR-1
PXL_20220416_092238234.MP.jpg IMR-1
PXL_20220416_092432711.MP.jpg IMR-1
PXL_20220416_092512699.PORTRAIT.jpg IMR-1
PXL_20220416_092532498.MP.jpg IMR-1
PXL_20220416_092552360.MP.jpg IMR-1
PXL_20220416_092612419.MP.jpg IMR-1
PXL_20220416_092628531.MP.jpg IMR-1
PXL_20220416_092800613.MP.jpg IMR-1
PXL_20220416_092825700.MP.jpg IMR-1
PXL_20220416_093302469.MP.jpg IMR-1
PXL_20220416_093336254.MP.jpg IMR-1
r1.png IMR-1
r1_2.png IMR-1
r2.png IMR-1
r3.png IMR-1
r4.png IMR-1
r5.png IMR-1
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 23.5k views
  • 143 likes
  • 1.1k downloads
  • 3 collections
  • 6 comments
License
3D design format
ZIP Folder details Close
  • imr_1.zip
    • hull/bottom.stl
    • hull/cut/bottom_1.stl
    • hull/cut/bottom_2.stl
    • hull/cut/bottom_3.stl
    • hull/cut/mudguarg_left.stl
    • hull/cut/mudguarg_right.stl
    • hull/cut/side_left_1.stl
    • hull/cut/side_left_2.stl
    • hull/cut/side_left_3.stl
    • hull/cut/side_right_1.stl
    • hull/cut/side_right_2.stl
    • hull/cut/side_right_3.stl
    • hull/cut/top_1.stl
    • hull/cut/top_2.stl
    • hull/cut/top_3.stl
    • hull/exhaust.stl
    • hull/front.stl
    • hull/hatch_driver.stl
    • hull/mudguard_left.stl
    • hull/mudguard_right.stl
    • hull/rear.stl
    • hull/side_left.stl
    • hull/side_right.stl
    • hull/top.stl
    • hull/top_additional_turret.stl
    • hull/top_engine_hatch.stl
    • hull/torsion_cover_1.stl
    • hull/torsion_cover_2.stl
    • hull/vertical_front.stl
    • hull/vertical_front__switch_mount.stl
    • hull/vertical_rear.stl
    • stuff/beam_holder.stl
    • stuff/beam_holder_cover.stl
    • stuff/blade__arms.stl
    • stuff/blade__base.stl
    • stuff/blade__center.stl
    • stuff/blade__center_pin.stl
    • stuff/blade__elevation__arm.stl
    • stuff/blade__elevation__lever.stl
    • stuff/blade__elevation__rod.stl
    • stuff/blade__hydraulics_horizontal.stl
    • stuff/blade__hydraulics_main.stl
    • stuff/blade__hydraulics_vertical.stl
    • stuff/blade__left.stl
    • stuff/blade__right.stl
    • stuff/bottom_front_bolts_mount.stl
    • stuff/front_hook.stl
    • stuff/jib_hydraulics.stl
    • stuff/jib_support.stl
    • stuff/light.stl
    • stuff/light_protector.stl
    • stuff/manipulator__balancer.stl
    • stuff/manipulator__connector_thick.stl
    • stuff/manipulator__connector_thin.stl
    • stuff/manipulator__left.stl
    • stuff/manipulator__mount.stl
    • stuff/manipulator__right.stl
    • stuff/manipulator__rod.stl
    • stuff/rear__hook.stl
    • stuff/rear__hook_latch.stl
    • stuff/smoke_mount.stl
    • stuff/track_paperclip_measure_38mm.stl
    • suspension/balancer.stl
    • suspension/drive_sprocket.stl
    • suspension/drive_sprocket_cover.stl
    • suspension/gearbox.stl
    • suspension/idler_cover.stl
    • suspension/idler_inner.stl
    • suspension/idler_mount.stl
    • suspension/idler_outer.stl
    • suspension/limiter.stl
    • suspension/torsion_hard.stl
    • suspension/torsion_soft.stl
    • suspension/track.stl
    • suspension/wheel.stl
    • suspension/wheel_cover.stl
    • suspension/wheel_rubber.stl
    • suspension/wheel_rubbered.stl
    • turret/cut/jib_inner_1.stl
    • turret/cut/jib_inner_2.stl
    • turret/cut/jib_outer_1.stl
    • turret/cut/jib_outer_2.stl
    • turret/gear.stl
    • turret/hatch_commander.stl
    • turret/jib_inner.stl
    • turret/jib_mount.stl
    • turret/jib_outer.stl
    • turret/jib_outer__bearings.stl
    • turret/main.stl
  • spec.zip
    • spec.xlsx

Learn more about the formats
Last update 2022-04-26 at 14:39
Publication date 2022-04-25 at 22:21
Design number 705642
RC_3D_Tanks

RC_3D_Tanks

3D printer file info

3D model description

Fully functional radio controlled model of IMR-1.
Can be turned into stand model by using plastic gearbox rod (attached in archive)

Peripheral:
- engines \ gearboxes (plastic / metallic)
- smoke
- fully functional suspension

Does not rotate turret, manipulator (crane) is static (might be implemented in future).
Blade is too heavy to make it work with HL electronics.

READ BEFORE YOU BUY

Manual, electronics β”‚Live preview | Video

Some numbers:
scale: 1/16
width: 220mm
length: 390mm
height: 230mm
weight: 2,250

Video: https://youtu.be/bKXW-W8cOyo

Chernobyl_NPP

36 years ago, on the 26th of April at 1:23am the world experienced one of the largest technological disaster ever known: the 4th reactor of the Chernobyl Nuclear Power Plant exploded. A huge tragedy for millions of people from modern Ukraine, Belarus and Russia.

map

People who recieved huge doses of radiation quickly died in first weeks after the tragedy. The liquidators, who worked in the most dangerous areas were irradiated enough that it slowly killed most of them. Those who survived and are still alive are suffering cancer, blood and lungs issues, alongside with other health issues caused by radiation.

hospital_126

All the former countries of USSR have criminally forgotten about the heroes who saved their lives. Still people do not receive the compensation they deserve, and governments are not focused on their plight. There is only a short "rememberance" on one day a year to produce nice pictures for TV.

imr

One of the tasks that has been given to the army was destroying adjacent villages which received enormous doses of radiatian and couldn't be decontaminated. After evacuation none of the villagers has ever gone back home.

IMR-1

The IMR is a Soviet tracked military engineering vehicle that had been sent to complete this task. There were two vehicles: IMR-1 and IMR-2, which are pretty much the same but based on different tank chassis (T-55 and T-72 respectively). You can find a lot of videos of these vehicles working in the containment zone, and even in front of the destroyed reactor.

This project is my personal tribute to every hero who sacrificed his own life to make sure I can live now. It is a free project and the main purpose of it is to provoke people to think about this enormous catastrophe and learn more about it. If you're interested enough, you can see that the password to the archive is 23600, - the number of T-55 tanks that were built, on which this vehicle is based.

3D printing settings

The password to unzip the archive is 23600

Nozzle: 0.2mm
Layer: 0.2mm
Torsion levers - 40-50% filling
Use thicker torsion bars for rear (because of gearbox weight)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.