Skip to content

Flying Balsa Conversion WarBirds (Complete Collection Bundle)

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.8k views
  • 6 likes
License
3D design format
STL and ZIP Folder details Close
  • 000-Hell Cat Top Assy (V3.0).STL
  • Hellcat V1 Full Model.stl
  • J7W1_Shinden_Full_Model_Draft.stl
  • RC Hellcat Mini V1.zip
    • Aileron (left).STL
    • Aileron (right).STL
    • Aileron Gear.STL
    • Aileron Servo Drive Shaft.STL
    • Canopy_longer.STL
    • Center_Wing_left.STL
    • Center_Wing_right.STL
    • Cowl.STL
    • Cylinder Plate.STL
    • Elevator _ Rudder Servo Bracket.STL
    • Elevator.STL
    • Fuselage (front).STL
    • Fuselage (rear).STL
    • Gear Box (bottom).STL
    • Gear Box (top).STL
    • Gear Box option B No set screws/type B Aileron shaft.stl
    • Gear Box option B No set screws/type B aileron with ribs and key.stl
    • Gear Box option B No set screws/type B Angled gearbox bottom deeper.stl
    • Gear Box option B No set screws/type B angled gearbox top.stl
    • Gear Box option B No set screws/type B square key gear.stl
    • Gear Box option B No set screws/type B Square shaft servo adapter(set Zaxis to2mm).stl
    • Gear Box option B No set screws/type B triangle gear.stl
    • Gear Mount Block.STL
    • Main Wing (left).STL
    • Main Wing (right).STL
    • Motor Moun (style 1).STL
    • Motor Moun (style 2).STL
    • Motor Mount (style 3).STL
    • Rudder.STL
    • Servo Gear.STL
    • Servo Retainer Bracket.STL
    • Stabilizer Assy.STL
    • Tail Wheel.STL
    • Wheel.STL
    • Wing Tip (left).STL
    • Wing Tip (right).STL
  • Spitfire_V1_Complete_Model.stl
  • Warbird Frames Full Collection.zip
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Front Tire.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Front Wheel Rim.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Left Landing gear Leg.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Left Landing gear Mount.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Left Landing Gear(1).stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Right Landing Gear Leg.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Right Landing Gear Mount.stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Right Landing Gear(1).stl
    • Hellcat Version 1(60% Scale ok)/Front Landing Gear/Wheel Connection Slider.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Edited Frame Piece 5 #1.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Edited Frame Piece 5 #2.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/EditedFrame piece 4 #1.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/EditedFrame piece 4 #2.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Firewall and motor mount V1.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Framepiece3#1.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Framepiece3#2.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable frame piece#0.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable frame piece#1.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable frame piece#2.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable frame piece#6.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable tail left.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/printable tail right.stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/Tail Rudder (Fixed).stl
    • Hellcat Version 1(60% Scale ok)/Fuselage/UpdatedCowlLighterWithMotorAccess.stl
    • Hellcat Version 1(60% Scale ok)/Pinting Readme orientation Notes.txt
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Control Arm.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Hub.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Mount.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Spacers.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly/Hub and Shock Axle.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly/Keyed Cap and connection rod..stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly/Rear Tire.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly/Rear Wheel.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly/Tail wheel mount.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tail Wheel Assembly.zip
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Tire.stl
    • Hellcat Version 1(60% Scale ok)/Rear Wheel Assembly/Wheel.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Main Body left.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Main Body Right.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Nose Left.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Nose Right.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Rear Body Left.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Rear Body Right.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Tail section Left.stl
    • Hellcat Version 1(60% Scale ok)/V1 EZtoPrint Fuselage Split Keel/Tail Section Right.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Central Wing.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Flap and Aileron Wedges/Aileron.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Flap and Aileron Wedges/Flap.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Left End Wing.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Left Mid Wing.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Right End Wing.stl
    • Hellcat Version 1(60% Scale ok)/Wings/Right Mid Wing.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Front Tire.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Front Wheel Rim.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Left Landing gear Leg.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Left Landing gear Mount.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Left Landing Gear(1).stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Right Landing Gear Leg.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Right Landing Gear Mount.stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Right Landing Gear(1).stl
    • Hellcat Version 2/Version 2/Front Landing Gear/Wheel Connection Slider.stl
    • Hellcat Version 2/Version 2/Fuselage/frame piece 4 (2).stl
    • Hellcat Version 2/Version 2/Fuselage/frame piece 4.stl
    • Hellcat Version 2/Version 2/Fuselage/Frame Piece 5(2).stl
    • Hellcat Version 2/Version 2/Fuselage/Frame Piece 5.stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage piece 3(2).stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage piece 3.stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage V2 printable section(1).stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage V2 printable section(2).stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage V2 printable section(6).stl
    • Hellcat Version 2/Version 2/Fuselage/Fuselage V2 printable section.stl
    • Hellcat Version 2/Version 2/Nose/Firewall and motor mount V1.stl
    • Hellcat Version 2/Version 2/Nose/UpdatedCowlLighterWithMotorAccess.stl
    • Hellcat Version 2/Version 2/Pinting Readme orientation Notes.txt
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Control Arm.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Hub.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Mount.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Spacers.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly/Hub and Shock Axle.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly/Keyed Cap and connection rod..stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly/Rear Tire.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly/Rear Wheel.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly/Tail wheel mount.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tail Wheel Assembly.zip
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Tire.stl
    • Hellcat Version 2/Version 2/Rear Wheel Assembly/Wheel.stl
    • Hellcat Version 2/Version 2/Tail/printable tail left.stl
    • Hellcat Version 2/Version 2/Tail/printable tail right.stl
    • Hellcat Version 2/Version 2/Tail/Tail Rudder (Fixed).stl
    • Hellcat Version 2/Version 2/Wings/V2 Central Wing.stl
    • Hellcat Version 2/Version 2/Wings/V2 Left Inner Wing.stl
    • Hellcat Version 2/Version 2/Wings/V2 Left Outer Wing.stl
    • Hellcat Version 2/Version 2/Wings/V2 Right Inner Wing.stl
    • Hellcat Version 2/Version 2/Wings/V2 Right Outer Wing.stl
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hel Cat Elevator (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat 80mm Rim (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat 80mm Tire (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Aileron (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Aileron (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Battery Holder (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat BH 7-9 (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat BH 7-9 (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Canopy (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Center Wing (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Center Wing (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Cowl (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Dummy Flap Servo Assy (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Elevator (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Elevator Servo Cover (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat External Wing (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat External Wing (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH 3-5 (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH 3-5 (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH 5-7 (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH 5-7 (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH1-3 (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat F6F Fuselage BH1-3 (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Flap (left _ right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Gear Mount Block (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Gear Mount Block (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Horizontal Stabilizer (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Horizontal Stabilizer (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Landing Gear (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Landing Gear (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Main Wing Retainer (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Middle Wing (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Middle Wing (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Motor Mount (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Rudder (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Rudder Servo Cover (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Servo Bracket (common) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Tail Wheel (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Tail Wheel Gear (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Vertical Stabilizer (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Vertical Stabilizer Base (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Hell Cat Wheell Axle (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Quad Cut Center Wing STLs/Hell Cat Center Wing Front (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Quad Cut Center Wing STLs/Hell Cat Center Wing Front (right) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Quad Cut Center Wing STLs/Hell Cat Center Wing Tail (left) (V3.0).SLDPRT
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Quad Cut Center Wing STLs/Hell Cat Center Wing Tail (left) (V3.0).STL
    • Hellcat Version 3 (Electronics Ready)/Hell Cat Final Release (2022-02-18)/Quad Cut Center Wing STLs/Hell Cat Center Wing Tail (right) (V3.0).STL
    • J7W1 Shinden V1 (60% scale ok)/Elevon With support x2mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/Front Canardx2 Mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/Front Landing Gear Mount.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage1Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage1right.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage2Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage2right.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage3Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage3right.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage4Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Fuselage4right.stl
    • J7W1 Shinden V1 (60% scale ok)/J7W1 Shinden Full Model Draft.stl
    • J7W1 Shinden V1 (60% scale ok)/Landing Gear Leg Longx3need1 mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/Landing Gear Mount Wingx2 Mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/motormount.stl
    • J7W1 Shinden V1 (60% scale ok)/Shinden Propeller(1).stl
    • J7W1 Shinden V1 (60% scale ok)/Shinden Vertical Stabilizerx2 Mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/Side Vent x2 mirrior.stl
    • J7W1 Shinden V1 (60% scale ok)/Stabilizer Wheelx2.stl
    • J7W1 Shinden V1 (60% scale ok)/Static Propeller with spinner.stl
    • J7W1 Shinden V1 (60% scale ok)/Tire.stl
    • J7W1 Shinden V1 (60% scale ok)/Wheel Connection Slider.stl
    • J7W1 Shinden V1 (60% scale ok)/Wheel Rim.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing Center Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing Center Right.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing External Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing External Right.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing Mid Left.stl
    • J7W1 Shinden V1 (60% scale ok)/Wing Mid Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Battery Hatch.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Belly Panel.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Cowl.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Elevator.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Full Fuselage.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Full Model.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Full Wing.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Front Left.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Front Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Mid Left.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Mid Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Tail Left.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Fuselage Tail Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 L-Aileron.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Motor Cap.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 R-Aileron.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Rudder.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing End Left.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing End Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing Left Full.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing Mid Left.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing Mid Right.stl
    • Polikarpov i-16 Version 1(60% scale ok)/i-16 V1 4-9-22/i-16 V1 Wing Right Full.stl
    • Spitfire Version 1(60% scale ok)/Detail Pieces/Exhaust Vents.stl
    • Spitfire Version 1(60% scale ok)/Detail Pieces/Spitfire Scoop Nose.stl
    • Spitfire Version 1(60% scale ok)/Detail Pieces/Wing Side Scoop.stl
    • Spitfire Version 1(60% scale ok)/Elevator Left Longer Hinges.stl
    • Spitfire Version 1(60% scale ok)/Elevator Right Longer Hinges.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Fuselage Mid Rear Left.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Fuselage Mid Rear Right.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Fuselage Wing Slot Left.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Fuselage Wing Slot Right.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Spitfire motor mount.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Spitfire Nose Left.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Spitfire Nose Right.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Spitfire Tail Section Left.stl
    • Spitfire Version 1(60% scale ok)/Fuselage/Spitfire Tail Section Right.stl
    • Spitfire Version 1(60% scale ok)/Fuselage Tail End For Longer Hinges Left.stl
    • Spitfire Version 1(60% scale ok)/Fuselage Tail End For Longer Hinges Right.stl
    • Spitfire Version 1(60% scale ok)/Middle Fuse W_Electronics Platform mirrior.stl
    • Spitfire Version 1(60% scale ok)/spitfire battery hatch.stl
    • Spitfire Version 1(60% scale ok)/Spitfire Canopy.stl
    • Spitfire Version 1(60% scale ok)/Spitfire motor mount.stl
    • Spitfire Version 1(60% scale ok)/Spitfire Nose Left.stl
    • Spitfire Version 1(60% scale ok)/Spitfire Nose Right.stl
    • Spitfire Version 1(60% scale ok)/Spitfire Rear with 9g Servo mount Mirror.stl
    • Spitfire Version 1(60% scale ok)/Spitfire Rudder Longer Horn.stl
    • Spitfire Version 1(60% scale ok)/Spitfire V1 Complete Model.stl
    • Spitfire Version 1(60% scale ok)/Tail/Elevator Left.stl
    • Spitfire Version 1(60% scale ok)/Tail/Elevator Right.stl
    • Spitfire Version 1(60% scale ok)/Tail/Spitfire Rudder.stl
    • Spitfire Version 1(60% scale ok)/Tail/Stabilizer Left.stl
    • Spitfire Version 1(60% scale ok)/Tail/Stabilizer Right.stl
    • Spitfire Version 1(60% scale ok)/Tail/Vertical Stabilizer Hinge.stl
    • Spitfire Version 1(60% scale ok)/Wings/Aileron Bottom Horn (mirrior).stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing Central Left.stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing End Left.stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing Middle Left.stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing Right Central.stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing Right End.stl
    • Spitfire Version 1(60% scale ok)/Wings/Wing Right Middle.stl
    • Spitfire Version 2 (Electonics Ready)/Detail Pieces/Exhaust Vents.stl
    • Spitfire Version 2 (Electonics Ready)/Detail Pieces/Spitfire Scoop Nose.stl
    • Spitfire Version 2 (Electonics Ready)/Detail Pieces/Wing Side Scoop.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Fuselage Tail End For Longer Hinges Left.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Fuselage Tail End For Longer Hinges Right.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Middle Fuse W_Electronics Platform mirrior.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/spitfire battery hatch (optional).stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Spitfire Canopy.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Spitfire motor mount.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Spitfire Nose Left.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Spitfire Nose Right.stl
    • Spitfire Version 2 (Electonics Ready)/Fuselage/Spitfire Rear with 9g Servo mount Mirror.stl
    • Spitfire Version 2 (Electonics Ready)/Spitfire V1 Complete Model.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Elevator Left Longer Hinges.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Elevator Right Longer Hinges.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Spitfire Rudder Longer Horn.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Stabilizer Left.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Stabilizer Right.stl
    • Spitfire Version 2 (Electonics Ready)/Tail/Vertical Stabilizer Hinged.stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Aileron Bottom Horn (mirrior).stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Wing Central Left.stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Wing End With 9g Servo (mirrior).stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Wing Middle Left.stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Wing Right Central.stl
    • Spitfire Version 2 (Electonics Ready)/Wings/Wing Right Middle.stl
  • i-16_V1_Full_Model.stl

Learn more about the formats
Publication date 2022-04-26 at 17:50
Design number 706480
The3vilRoYcE

The3vilRoYcE

3D printer file info

3D model description

This Bundle includes all The converted aircraft I have done with all versions included, also you will continue to have access to any new projects as the plans release.
as of 4/26/2022 this package includes
1.Hellcat V1,V2,V3
2.J7W1 Shinden V1
3.Spitfire V1,V2
4. Polikarpov I-16 V1

Some of these models can be scaled down for those who are not trying to make flight ready models and others can not be scaled due to electronics cutouts and such.
These can be covered with iron on coverings or Wet strength tissue paper. I have tried and confirmed that both strategies do work fairly well and the heat of an iron isn't as bad as you would imagine with a 3d printed part. I still personally prefer the tissue paper coverings with acrylic painted on details. At 60% scale some of these make great display models even if you decide you don't want to cover them.

Update! 6/28/2022: RC Hellcat Mini V1 has been added into the download collection. Visit the main page for that build for more Detailed information.

Printing Instructions for the Hellcat Mini: https://drive.google.com/file/d/1eEFWn5qj5NtcMb3Waoa93h0J0ime95e_/view?usp=sharing

3D printing settings

Varies by model and version

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.