Btwin Elops 900 Rack Folding Bike Adapter

With this adapter, you can easily turn your folding bike into a Compact Utility Bike, helps with carrying a wider range of cargo on your bicycle and it doesn't block the folding mechanism as it mount your rack on a higher position forward.

It also retain a 10KG load capacity for the front rack adapter. Since I also have a 2nd handed Elops 900 Rack, I developed the Type X to work with Elops 900 Front Racks.

Type X -
Shift Front Attachment Position to allow better clearance on Folding Bike. Can Carry 10KG loads. Work with Elops 900 Front Rack.

Check a More Detail 3D model over at my Artstation: https://www.artstation.com/artwork/4X35oL

My 3D Printer(EasythreeD X3) Settings using Cura:

Layer Height: 0.2mm(or 0.1 if you want)
Wall Thickness: 1.2
Wall Line Count: 3
Infill Density: 50% and above
Infill Pattern: Octet
Printing Temperature: 185c
Build Plate Temperature: 45c[Or 0c if no heat bed]
Print Speed: 30mm
Support Placement: Touching Buildplate Only
Support Overhang Angle: 50
Build Plate Adhesion Type: Skirt
G-code Flavor: Marlin

Post-Printing:
You will requires:
2 x 50mm - M6 Bolt/Screws
2 x 24mm - M6 Bolt/Screws and Nuts
(Addition stuffs, If you are using the Elops 900 Rack)
4 x 50mm - M8 Bolt/Screws and Nuts
4 x M8 Retaining Washer [*Required]
Print 1 Elops Adapter Plate.stl[*Required]