3D model description
MICRO-GP is a printable micro scale racetrack, the evolution of my previously released Route76, with a whole ton of upgrades and new ideas!
https://www.youtube.com/watch?v=3a0oEYk_x8k
This set allows you to create fantastic looking home circuits where to race your TurboRacing 1/76 scale RC cars.
The construction has been made as simplest as possible by creating a versatile multicolor assembly that only require some parts to be printed in a color and some with other colors, no glue nor screws are needed.
Modules are 5mm thick and have reversible snapping clips along the running sense and hidden slots for expansion sets on the sides.
This simple but functional feature makes the circuit always clean to see, with no unused clips coming out the sides if you don't have/use the larger version, for example if you want to create your own hills and rocks around the printed clear road.
Almost every part have bonus stripe-fissures variant that can be fillled with a rope or a colored stick to recreate road sign stripes, there are side stripes on all straights and turns pieces plus specific ones for the pitlane kit aswell.
In the same way you find all parts in fissure-less version, these are found in the folders.
Like the smaller one, this circuit have starting grid and finishline parts, so you can print the white pieces to snap into the fissures or just use flat modules and tape your favourite stickers.
Expansion-related parts let you expand in both right and left direction the circuit width, up to 230 mm inside the barriers.
There are 2 variant for the expansion flat parts, one is clear and can be used as extra road or a different color to simulate grass or sand, and the other have textured surface covered with little pins, which role is to simulate control and speed loss when running off the asphalt.
As same as the road-only assembly, even the expanded one can be used without its barriers while still having no clips coming out the edges.
Barriers are 20mm tall above the road so there is no way you have flying cars jumping off the table during crashes, only the barriers dividing the pitlane are 10mm tall.
The fancy Pitlane parts are perfect to give the ultimate look to your build, team houses where you can park your rides inside, or hide your favourite electronic system in the upper floor box, finishlane'd pit module, crossing road sign fissures and rounded headed barriers for the first and last dividers.
You can literally build a circuit that fit in a suitcase, up to a gigantic structure filling every centimeter of your room untill you can no more walk in there, but just run the hella out your micro's (like the crazy me did) :D Joking, you still have little gaps to step in for movin :P
This downloadable item, COMPLETE EDITION, features everything included in the following packs:
Instruction headups in the pics.
LM RACING
Radio Control Creations
2022 ITALY
3D printing settings
Whatever fits your need, recommended to not make bottom layers, supports are needed but only for small areas.
Larger extruders and layers will speed up your job, only focus to the very top layers quality as they're be visible and you're fine.
Extra top layers and/or perimeters for barriers so the clip zone will be strong, most sharp angle edgest of most parts have been rounded a little on the tips to help speedy makers.