Raspberri-Pi Server Case

Mini PC case for Raspberri-Pi 3b+

I made this case to have a nice protection for my Raspberri, in the spirit of a mini PC that looks nice on a desk!

I designed this case for easy 3D printing (without brackets) and for easy assembly.

You will need:

• 4 M3 12mm screws to fix the front panel

• 2 M3 8mm screws to fix the back of the Raspberri

• 2 screws M3 12mm to fix the front of the Raspberri

• 4 M3 6mm screws (or more) and 4 nuts to fix the legs

• 4 screws and nuts to fix the fan you have chosen.

When creating, I thought about those who use the 30x30 fans often supplied with Raspberri and those who want to install a 40x40 fan.

On the top part, I put a small logo but I also added a top part without logo if you ever don't like!

For the assembly, nothing special or difficult!!!

-Start by installing the feet on the bottom side and insert it into the box.

-Place the Raspberri in the case with the two small spacers.

• Attach the fan you have chosen to the corresponding face.

-Insert the side and top faces.

-Connect the fan to the Raspberri, place the faceplate and secure it with 4 screws and voila!!!

For the printing part, place the elements flat in your slicer to avoid the supports.

-you have to print one element of each

-you need to print 2 wedges 3mm

-you need to print 4 feet ( it's better for the stability :-) )

to be adapted according to your printer:

-layer height 0.12, 0.16 or 0.2mm

-filling 15% minimum

• 4 walls minimum

-no supports

-speeds: up to you