Skip to content

Drakborgen and Dungeonquest 3D Tile Set

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.3k views
  • 29 likes
  • 9 downloads
  • 4 collections
License
3D design format
STL and ZIP Folder details Close
  • 65-abyss adjusted scale 20240424.stl
  • 66-portcullis-dead-end adjusted scale 20240424.stl
  • 67-portcullis-dead-end adjusted scale 20240424.stl
  • 68-portcullis-dead-end adjusted scale 20240424.stl
  • 69-portcullis-left-n-right-and-forward adjusted scale 20240424.stl
  • 70-portcullis-portcullises-left-and-right-and-open-forward adjusted scale 20240424.stl
  • 71-portcullis-left-right-and-forward adjusted scale 20240424.stl
  • 72-portcullis-portcullises-in-all-directions adjusted scale 20240424.stl
  • 73-portcullis-left-and-right adjusted scale 20240424.stl
  • 74-portcullis-left-and-right adjusted scale 20240424.stl
  • 75-portcullis-forward adjusted scale 20240424.stl
  • Drakborgen Tileset zip.zip
    • 93 CORRIDOR Right and Forward.stl
    • 77 PORTCULLIS Right Turn.stl
    • 86 CORRIDOR Left and Right.stl
    • 2 TWOWAY Straight.stl
    • 20 TWOWAY Right Turn.stl
    • 76 PORTCULLIS Forward.stl
    • 17 b extra TWOWAY Left Turn.stl
    • 41 THREEWAY Left and Forward.stl
    • 45 THREEWAY Right and Forward.stl
    • 23 TWOWAY Right Turn with Door.stl
    • 34 THREEWAY Left and Right.stl
    • 66 PORTCULLIS dead end.stl
    • 79 PORTCULLIS Left Turn.stl
    • 50 THREEWAY Right and Forward.stl
    • 43 THREEWAY Left and Forward.stl
    • 92 CORRIDOR Left and Forward.stl
    • 94 CORRIDOR Right and Forward.stl
    • 105 ROTATING CHAMBER.stl
    • 100 DEAD END.stl
    • 16 TWOWAY Left Turn.stl
    • TOWER 3.stl
    • 84 CORRIDOR Fourway.stl
    • 67 PORTCULLIS dead end.stl
    • 6 TWOWAY Straight.stl
    • 60 FOURWAY.stl
    • 81 CORRIDOR Forward.stl
    • 109 ROTATING CHAMBER.stl
    • 82 CORRIDOR Forward.stl
    • 44 THREEWAY Right and Forward.stl
    • 38 THREEWAY Left and Forward.stl
    • 9 TWOWAY Left Turn with Door.stl
    • 103 b extra DEAD END.stl
    • 118 TRAP ROOM Fourway.stl
    • TOWER 2.stl
    • 80 PORTCULLIS Left Turn.stl
    • 89 CORRIDOR Right Turn.stl
    • 68 PORTCULLIS dead end.stl
    • 112 RUBBLE ROOM.stl
    • 70 PORTCULLIS portcullises left and right and open forward.stl
    • 78 PORTCULLIS Right Turn.stl
    • 25 THREEWAY Left and Right and Door.stl
    • 53 FOURWAY.stl
    • 121 TREASURE HOARD.stl
    • 42 THREEWAY Left and Forward.stl
    • 83 CORRIDOR Fourway.stl
    • 39 THREEWAY Left and Forward.stl
    • 28 THREEWAY Left and Right and Door.stl
    • 22 TWOWAY Right Turn.stl
    • 37 THREEWAY Left and Forward.stl
    • 114 SPLIT ROOM.stl
    • 46 THREEWAY Right and Forward.stl
    • 101 DEAD END.stl
    • 27 THREEWAY Left and Right and Door.stl
    • 85 CORRIDOR Left and Right.stl
    • 57 FOURWAY.stl
    • 54 FOURWAY.stl
    • 4 TWOWAY Straight.stl
    • 63 FOURWAY.stl
    • 106 ROTATING CHAMBER.stl
    • 104 DEAD END Three Doors.stl
    • 102 DEAD END.stl
    • 14 TWOWAY LeftTurn.stl
    • 26 THREEWAY Left and RIght and Door.stl
    • 32 THREEWAY Left and Right.stl
    • 49 THREEWAY Right and Forward.stl
    • 3 TWOWAY Straight.stl
    • 117 TRAP RROM Left and Forward.stl
    • 5 TWOWAY Straight.stl
    • 18 TWOWAY Right Turn.stl
    • 40 THREEWAY Left and Forward.stl
    • 12 TWOWAY Left Turn.stl
    • 15 TWOWAY Left Turn.stl
    • 111 RUBBLE ROOM.stl
    • 1 TWOWAY Straight.stl
    • 47 THREEWAY Right and Forward.stl
    • 110 RUBBLE ROOM.stl
    • 98 DARK ROOM Right Turn.stl
    • 52 FOURWAY.stl
    • 87 CORRIDOR Left Turn.stl
    • 55 FOURWAY.stl
    • 71 PORTCULLIS Left Right and Forward.stl
    • 90 CORRIDOR Right Turn.stl
    • 7 TWOWAY Straight.stl
    • 33 THREEWAY Left and Right.stl
    • 119 TRAP ROOM Fourway.stl
    • 58 FOURWAY.stl
    • 116 TRAP ROOM Left and Forward.stl
    • 120 b extra TRAP ROOM Fourway.stl
    • 36 THREEWAY Left and Right.stl
    • 31 THREEWAY Left and Right.stl
    • 64 ABYSS.stl
    • 13 TWOWAY Left Turn.stl
    • 108 ROTATING CHAMBER.stl
    • 120 TRAP ROOM Fourway.stl
    • 103 DEAD END.stl
    • 56 FOURWAY.stl
    • 8 TWOWAY Straight.stl
    • 69 PORTCULLIS Left Right and Forward.stl
    • 10 TWOWAY Left Turn with Door.stl
    • 91 CORRIDOR Left and Forward.stl
    • 95 DARK ROOM Left and Right.stl
    • 35 THREEWAY Left and Right.stl
    • 65 ABYSS.stl
    • 11 TWOWAY Left Turn.stl
    • 73 PORTCULLIS Left and Right.stl
    • 88 CORRIDOR Left Turn.stl
    • 21 TWOWAY Right Turn.stl
    • 113 RUBBLE ROOM.stl
    • TOWER 4 b extra without skulls.stl
    • 74 PORTCULLIS Left and Right.stl
    • 17 TWOWAY Left Turn.stl
    • 109 b extra ROTATING CHAMBER.stl
    • 97 DARK ROOM Left Turn.stl
    • TOWER 1.stl
    • 59 FOURWAY.stl
    • 107 ROTATING CHAMBER.stl
    • 30 THREEWAY Left and Right.stl
    • 29 THREEWAY Left and Right.stl
    • 61 FOURWAY.stl
    • 96 DARK ROOM Left and Right.stl
    • 19 TWOWAY Right Turn.stl
    • 75 PORTCULLIS Forward.stl
    • 65 b extra ABYSS.stl
    • TOWER 4 with skulls.stl
    • 51 FOURWAY.stl
    • 99 DEAD END.stl
    • 115 SPLIT ROOM.stl
    • 24 THREEWAY Left and Right and Door.stl
    • 72 PORTCULLIS portcullises in all directions.stl
    • 62 FOURWAY.stl
    • 48 THREEWAY Right and Forward.stl
    • 63 b extra FOURWAY.stl

Learn more about the formats
Last update 2024-04-24 at 18:42
Publication date 2022-04-30 at 22:45
Design number 710760
SharedogMiniatures

SharedogMiniatures

3D printer file info

3D model description

Intended for 3d print.

Update 20240424 : There may have been an issue with proper scaling on a few of the tiles. Properly scaled tiles have now been added to the tileset. The updated tiles have " adjusted scale " added in their file names.

What is this?

Drakborgen, known as Dungeonquest in the UK, is a boardgame originally published by Swedish game company Alga in 1985. It is considered a classic in Sweden, and unfortunately less so in the UK/US - possibly because the English version lacked a lot of polish and original artwork.
In the game, you explore the interior of a sinister fortress, hunting for the dragon's treasure hoard hidden somewhere within the treacherous maze.
As you play, you continuously map the fortress using flat cardboard tiles. This product is an attempt to create a comprehensive 3D tileset , allowing you to explore the dragon's fortress using three-dimensional tiles instead of flat cardboard. The 3D tileset contains the exact same number and type of tiles found in the original 1985 edition, so you can swap out the cardboard tiles for the 3D set without it affecting gameplay. The 3D tiles are compatible with the original Drakborgen game board (see image gallery), and, to my knowledge, with Dungeonquest as well. They can also be used as interiors for other boardgames or tabletop games, like War hammer or Dungeons & Dragons.
The tileset contains 126 unique tiles in total, including four tower tiles that can be used as the starting points for the game.
The artstyle of the 3D tiles are inspired by the artwork of the original game. This includes a forced perspective visual style, where the walls and objects of the tiles slope inwards at the bottom to give the impression of greater depth when viewed from above.

Will I still need the original game to play using these 3D tiles?

Yes, definitely. This product only includes models intended to replace the cardboard tiles of the original game. You still need the rulebook, cards, various game pieces et cetera of the boardgame in order to play.
If you do not own any editions of Drakborgen or Dungeonquest already, there are plenty or copies for sale on various online auction sites like eBay. Swedish game company Fandrake also recently re-released Drakborgen, and is considering releasing a true English version in the future. As of May 2022, you can petition them here:
https://fandrake.com/drakborgen-english-edition/

How do I use this tileset?

First off, you'll need access to a 3D printer.
Secondly, you need to print 1 copy of each tile in the tileset . If you intend to use the 3D tiles for the original Drakborgen board game, you need to print 116 of the 126 tiles (the remaining 10 are extra tiles, plus the four starting point tiles that are entirely optional).
The tile print files are numbered, so keeping track of which tile you need to print next is easy. Once you've printed the tile marked no 1, you print no 2 and so on. The "bonus" tiles mentioned earlier are clearly named 'extra' , so you'll know you can skip them.

Do note that 116 tiles are quite a lot of models to print - If you intend to print up an entire set, expect to devote a lot of printing time and filament/resin to the project. A single tile printed at high settings takes approximately 1.5 hours to print. Also note that depending on the quality of your printer, some of the finer details on the tiles may or may not show up properly at default scale.

Each tile is currently prescaled to 4.5 cm x 4.5 cm in size. The dimensions of the original cardboard tiles vary by edition, but it is my understanding 4.5x4.5 are the dimensions used in the original 1985 release. If you own a Drakborgen/Dungeonquest game board, always check what size is right for you , and adjust accordingly before printing.

Finally, note that most tiles will have a round symbol display added to one edge (see image gallery). This display will feature either an arrow, a triple arrow, a foot stepping on spikes or an eye. These symbols corresponds to the "ordinary room", "corridor", "trap room" or "dark room" found in the Drakborgen board game. In the original game, the type of room is denoted by a dot in a specific colour - in this 3d tileset, symbols are used instead since the printed model will be monochrome.

Will this tileset work for other tabletop games?

Yes, tolerably so. Just be aware that a tile printed at, for example, 28mm scale will take quite a lot of time and material to print. And that the tiles use forced perspective, which may or may not be to your liking.

Note that the number of tiles included in this tileset is supposed to correspond to the number of carboard tiles in the the original 1985 Drakborgen edition only. Later editions have expanded rules, and consequently more tiles as well. If you want me to add additional tiles to make the tileset compatible with later editions I may be able to do so, but you will probably have to provide me with a comprehensive list of the number and type of tiles required for Your particular edition.

Wikipedia articles about the original boardgames:

https://en.wikipedia.org/wiki/Dungeonquest
https://sv.wikipedia.org/wiki/Drakborgen

3D printing settings

Relatively high printer settings are recommended (0,08 mm layer height, 20 percent infill).
Printing time depends entirely on hardware, selected size, selected model(s) selected settings et cetera. A rough estimate is 1.5 hours printing time for a single model at default scale.

No models are presupported. If getting presupported models are important to you, you can contact me and I'll include presupported versions in the product.

https://www.youtube.com/watch?v=B_xiIBSUnPE

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.