Skip to content

F-16 Fighting Falcon RC 80mm EDF 1200mm V2!

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.8/5 (8 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 58.9k views
  • 256 likes
  • 311 downloads
  • 2 collections
  • 13 comments
  • 2 makes
License
3D design format
PDF, STL, and ZIP Folder details Close
  • Canopy 1.stl
  • Canopy 2.stl
  • Canopy no-slip bracket.STL
  • Cheater hole bottom.stl
  • Cheater hole top left.stl
  • Cheater hole top right.stl
  • Drag chute.stl
  • Duckt.stl
  • ESC holder.STL
  • Engine bay cover.stl
  • Exhaust.stl
  • F-16 Print and Build instructions.pdf
  • Fuselage 1.stl
  • Fuselage 2 Lower.stl
  • Fuselage 2 lower insert.stl
  • Fuselage 2 upper.stl
  • Fuselage 3.stl
  • Fuselage 4 retracts.stl
  • Fuselage 5.stl
  • Fuselage and minor light mod v2.1.zip
  • Left Aileron.stl
  • Left Wing servo cover.stl
  • Left horizontal stab.stl
  • Left lower fin.stl
  • Left speedbrake.stl
  • Left wing 1-1.stl
  • Left wing 1-2.stl
  • Left wing 1.stl
  • Left wing 2.stl
  • Main landing gear bay insert left.stl
  • Main landing gear bay insert right.stl
  • No landing gear insert L1.stl
  • No landing gear insert L2.stl
  • No landing gear insert R1.stl
  • No landing gear insert R2.stl
  • No nose landing gear insert 1.stl
  • No nose landing gear insert 2.stl
  • Nose Cone.stl
  • Pitot.stl
  • Receiver hatch.stl
  • Right Aileron.stl
  • Right Wing Locking unit.stl
  • Right Wing servo cover.stl
  • Right horizontal Stab.stl
  • Right lower fin.stl
  • Right speedbrake.stl
  • Right wing 1-1.stl
  • Right wing 1-2.stl
  • Right wing 1.stl
  • Right wing 2.stl
  • Rudder_fixed.stl
  • Servo horn rudder.STL
  • Servo horn.STL
  • Servocover Tail Fin.stl
  • Spacer stab.STL
  • Tail fin rudder bottom bracket.stl
  • Tail front.stl
  • Tailfin.stl
  • Top bar tail fin.stl
  • Vers 2.0.zip
    • Aileron servohorn v2 - microholes.stl
    • Aileron servohorn v2.stl
    • canopy and Cockpit v2/Canopy plug 1.stl
    • canopy and Cockpit v2/Canopy plug 2.stl
    • canopy and Cockpit v2/Canopy plug centerpin.stl
    • canopy and Cockpit v2/Canopy plug stand.stl
    • canopy and Cockpit v2/Cockpit.STL
    • Cockpit Left side.stl
    • Fuselage 1 v2.stl
    • Fuselage 2 lower insert v2.stl
    • Fuselage 2 lower v2.stl
    • Fuselage 2 upper v2.stl
    • Fuselage 3 v2.stl
    • Fuselage 4 v2.stl
    • Fuselage 5 v2 22g Servo.stl
    • Fuselage 5 v2.stl
    • Left Aileron v2.stl
    • Left speedbrake.stl
    • Left wing 1 v2.stl
    • Left wing 2 v2.stl
    • Left wing Servo bracket v2.stl
    • Left wing Servo cover v2 22g.stl
    • Left wing Servo cover v2 9g.stl
    • Missile holder Left v2.stl
    • Missile holder Right v2.stl
    • Right Aileron v2.stl
    • Right speedbrake.stl
    • Right wing 1 v2.stl
    • Right wing 2 v2.stl
    • Right wing Servo bracket v2.stl
    • Right wing Servo cover v2 22g.stl
    • Right wing Servo cover v2 9g.stl
    • Rudder v2.stl
    • Servocover Tail Fin.stl
    • Tailfin v2.stl
    • Top bar tail fin v2.stl
  • left Wing Locking unit.stl
  • missile holder Right.stl
  • missile holder left.stl

Learn more about the formats
Last update 2024-04-09 at 16:07
Publication date 2022-05-02 at 13:16
Design number 712327
sindregjertsen

sindregjertsen

3D printer file info

3D model description

Update V2.1 - 09.04.2024
V2.1 includes:
-Modified fuselage 3 to blend better to the S6063
-Modified fuselage 4 to blend better to the S6063
-Lighting pack V1 .0
-Tailfin with internal slot for wire to anti-collition strobe
- Tailfin Top bar with internal slot for wire
- Anti collition strobe light
- Left and right position light for the Fuselage 2 lower
(needs cutout for now)
Only modified parts is in the V2.1 folder.

Thanks Jason, for the fuselage modifications :D

V2.0 is released!!!!!

Update 15.06.2023
V2.0 includes:
- S6063 wing profile - Much more stable flight characteristics
- Internal air inlet duct has been increased -better airflow to
engine
- Cockpit (needs at least 250 mm height 3D printer). The plug to make the canopy is included. Pilot was found online and scaled to fit.
- Mounting points under the wings for Pylons with armaments
(Pylons and Armaments will be sold seperate on Cult. https://cults3d.com/en/3d-model/game/armaments-pack-for-f-16-and-a-10-by-sindregjertsen. Notify me if there are specific armaments you would like to have)
-Choose between 9g and 22g servos on wings and elevators for better acro abilities.
-Prepared surface for gyro.
-Details added.

The V2 zip file only contains the files that have been updated. The rest should be reused from V1.

A new video is under construction.

SPECS:
Wingspan: 860mm
Length: 1210mm from exhaust to nose (without pitot)
Print weight: 1,2 kg of PLA+
With 6S - 5000mah and 80mm FMS fan : 2,7 Kg
CG: 90-95mm from the leading edge of the wing root.

Update 22.06.2022: Updated the PDF to include spar length, type and placements.

Update 07.06.2022: Added no landing gear inserts for those who wants to skip landing gear. See photo.

Update 13.05.2022: Wing1 has been split up into wing1-1 and wing1-2 for printers with less printspace than Prusa MK3S. Same print settings as for Wing 1.

INFO:
See flight video and taxing video here:
https://www.youtube.com/channel/UC9lXvOZmATa1WuuBzql4Z3Q
Build Video here
https://www.youtube.com/watch?v=7xBmeQXlawA

Mine is printed with a Prusa MK3S with a bed size of 250 x 210 x 210 mm. Some parts need to be rotated to fit the bed.

The landing struts are homemade and a guide will come soon on those. They are made from standard aluminum pipes, m3 bolts and nuts, some grub screws and springs. Made with a standard drill and dremel tool.

Disclaimer
This is a complex plane to print and build. This should not be your first RC plane both to build and to fly. If used for tabletop display only, then its not so hard. A good tuned printer and good bed adhesion is recommended. Some afterwork on a few of the printed parts are necessary. Most parts are printed with 1 perimeter but see the print instruction for details for each part. This guide is not complete yet but it is a work in progress.
Large STL files due to some complex form and high resolution.

If you have any questions, just ask and I will try my best to help.

Partslist:
FMS 80mm EDF - https://s.click.aliexpress.com/e/_A12U07

Servo 9g Metal - https://s.click.aliexpress.com/e/_A1S3Zd

Servo extensions - https://s.click.aliexpress.com/e/_A9p8ZN

Main Retracts - https://s.click.aliexpress.com/e/_ALoJ6x

Nose Retracts - https://s.click.aliexpress.com/e/_9RQT3l

Servo Connector safety clips - https://s.click.aliexpress.com/e/_Aob6t9

M3 - 10mm Selftap Screws -50pcs - https://s.click.aliexpress.com/e/_A0Q4Jt

1x5mm - 0,5m carbon strip - https://s.click.aliexpress.com/e/_AMPRK7

10PCS 8x6x500mm Carbon tube - https://s.click.aliexpress.com/e/_Alf96T

Neodymium Magnet 10*10*2
https://s.click.aliexpress.com/e/_AS6IRZ

PLA+ from SUNLU - 10Kg Pack
https://s.click.aliexpress.com/e/_Aad8Gj

Pluss some aluminium tubing, grub screws, m3 nuts and bolt, pushrods.

3D printing settings

See own PDF for printing instructions.

PDF for V2 is coming soon.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.