Tokyo Marui HI-CAPA 4.3 / 1911-4.3 LIGHTWEIGHT SLIDE "WTS2" WITHOUT SIGHTS

This slide "WTS2" is designed to work with pistols that made on TM HI-CAPA 4.3 platform and TM 1911 4.3 platform with inner barrel length 108-109mm (4.3) .

(Tested on Tokyo Marui HI-CAPA 4.3, Tokyo Marui Gold Match HI-CAPA 5.1,
Golden Eagle - all 1911 and hi-capa 4.3)

Slide weight only ~26gramm.

FOR FIXED BARRELS ONLY.

Slide comes WITHOUT SIGHTS for better adhesion to the 3d printer table.

Sights for sticking included.

You can use stock pistol parts to assemble slide.

Be careful with PSI over 90.

If you are printing with ABS, it is highly recommended to apply a thin coat of ABS adhesive (dissolved ABS in acetone) to the slide guide for recoil spring and bushing.

I do not give permission to publicly publish or resell the files you have purchased from this adapter. I do not give permission for commercial production of finished products based on these files. Only for personal use.

FOR FDM:
Material - pla, abs (tested, recommend), petg, nylon.
Layer hight and nozzle - a small as posible 0.1-0.12
Supports - YES

For ABS - Necessary use thermobox.
Adhesive for table: ABS-JUICE (dissolved ABS in acetone)
SLOW DOWN SPEED - wals not higher 30mm/s, overall speed not higher 40mm/s

All settings are approximate, adjust for your printer and test results