DJI Mavic 3 Landing Skids Phantomizer

DJI Mavic 3 Landing Skids Phantomizer Without Floater adapters

Phantomize and land your Mavic 3 or Classic or PRO with this landing skids.

A must have accessorie for boat use, or at a place that you need to catch your drone with your hands.

Also protecting your drone from scrathing the bottom plastics.

A nice way also to hold your drone and record video with your hands, when you want to film land shots.Mavic 3 records amazing shots also handhelded :)

Very easy to assemble in Approx 3 mins, easy to remove and transfer.

Instructions

Please note the little notches and where each cap goes.

As we see the drone from behind, Front Left leg has 1 notch, FR has 2, Rear Left leg has three notches and Rear right has 4 notches, all the notches see out of the drone, you can see also the images ;)

1. Please be sure before go. Check for Home point update on the map.
2. The drone is more sensitive on wind with the floaters.
3. Suggest to use it only for safety reason when you fly above sea and dont to land on the sea wihtout a significant reason.

Here you can see a video assembly with the floaters
https://www.youtube.com/watch?v=kJOpO2vXMnI

Happy Flying to All!

Recommend to print it in PLA or PLA +

No supports required.

2 -3 Walls is fine
15% - 30% infill is fine, we dont need to be heavy ;)

Find the sides with the most touching surface and print with this side to get less bridges as possible.

Included .gcode file ready to print it with bambulab printers