Skip to content

Crawler V303 4x4 (Volvo C303 Replica) - 1/10 RC body

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 8.7k views
  • 56 likes
  • 11 downloads
  • 2 collections
License
3D design format
ZIP Folder details Close
  • Crawler V303.zip
    • Lights/blinker L.stl
    • Lights/blinker R.stl
    • Lights/headlight bucket 1.stl
    • Lights/headlight bucket 2.stl
    • Lights/headlight lens 1.stl
    • Lights/headlight lens 2.stl
    • Mirrors/mirror arm L.stl
    • Mirrors/mirror arm R.stl
    • Mirrors/mirror L.stl
    • Mirrors/mirror R.stl
    • Mounts/Mount SCX10 iii L.stl
    • Mounts/Mount SCX10 iii R.stl
    • Mounts/Mount TRX4 L.stl
    • Mounts/Mount TRX4 R.stl
    • Mounts/Mount VS4-10 PRO and SCX10 ii L.stl
    • Mounts/Mount VS4-10 PRO and SCX10 ii R.stl
    • Roof/roof (split 1).stl
    • Roof/roof (split 2).stl
    • Roof/roof cover hinge 1.stl
    • Roof/roof cover hinge 2.stl
    • Roof/roof cover.stl
    • Roof/roof hinge arm 1.stl
    • Roof/roof hinge arm 2.stl
    • Roof/roof.stl
    • ahead RC V303.pdf
    • Bumper/bumper front pin.stl
    • Bumper/bumper front.stl
    • Bumper/bumper light shroud rear L.stl
    • Bumper/bumper light shroud rear R.stl
    • Bumper/bumper post 1.stl
    • Bumper/bumper post 2.stl
    • Bumper/bumper post 3.stl
    • Bumper/bumper post 4.stl
    • Bumper/bumper rear (HC ver).stl
    • Bumper/bumper rear cylinder mount.stl
    • Bumper/bumper rear cylinder.stl
    • Bumper/bumper rear hook.stl
    • Bumper/bumper rear lens 1.stl
    • Bumper/bumper rear lens 2.stl
    • Bumper/bumper rear lens 3.stl
    • Bumper/bumper rear light bucket 1.stl
    • Bumper/bumper rear light bucket 2.stl
    • Bumper/bumper rear light bucket 3.stl
    • Bumper/bumper rear.stl
    • Bumper/front bumper direct mount.stl
    • Bumper/rear bumper mount.stl
    • Cab/cab (split 1).stl
    • Cab/cab (split 2).stl
    • Cab/cab.stl
    • Cab/windshield.stl
    • Details/cab L bracket L.stl
    • Details/Cab L bracket R.stl
    • Details/cab side guard L 1.stl
    • Details/cab side guard L 2.stl
    • Details/cab side guard R 1.stl
    • Details/cab side guard R 2.stl
    • Details/cap 1.stl
    • Details/cap 2.stl
    • Details/footstep L (for exhaust mirrored).stl
    • Details/footstep L.stl
    • Details/footstep R (for exhaust).stl
    • Details/footstep R.stl
    • Details/front dish mount.stl
    • Details/front dish.stl
    • Details/fuel can holder.stl
    • Details/fuel can tall.stl
    • Details/grille (logo).stl
    • Details/grille.stl
    • Details/plate holder front lower 1.stl
    • Details/plate holder front lower 2.stl
    • Details/plate holder front upper.stl
    • Details/plate holder rear 1.stl
    • Details/plate holder rear 2.stl
    • Details/plate holder rear 3.stl
    • Details/radiator.stl
    • Details/spare wheel holder spacer.stl
    • Details/spare wheel holder.stl
    • Details/wiper L.stl
    • Details/wiper R.stl
    • Doors/door 2 L.stl
    • Doors/door 2 R.stl
    • Doors/door 2 window press L.stl
    • Doors/door 2 window press R.stl
    • Doors/door handle 1.stl
    • Doors/door handle 2.stl
    • Doors/door handle 3.stl
    • Doors/door handle 4.stl
    • Doors/door handle rear.stl
    • Doors/door L.stl
    • Doors/door R.stl
    • Doors/door rear.stl
    • Doors/door window press L.stl
    • Doors/door window press R.stl
    • Doors/door window press rear.stl
    • Doors/Hinges/lower hinge 1.stl
    • Doors/Hinges/lower hinge 1a.stl
    • Doors/Hinges/lower hinge 2.stl
    • Doors/Hinges/lower hinge 2a.stl
    • Doors/Hinges/lower hinge 3.stl
    • Doors/Hinges/lower hinge 3a.stl
    • Doors/Hinges/lower hinge 4.stl
    • Doors/Hinges/lower hinge 4a.stl
    • Doors/Hinges/rear hinge 1.stl
    • Doors/Hinges/rear hinge 2.stl
    • Doors/Hinges/rear hinge arm 1.stl
    • Doors/Hinges/rear hinge arm 2.stl
    • Doors/interior door handle 1.stl
    • Doors/interior door handle 2.stl
    • Doors/interior door handle 3.stl
    • Doors/interior door handle 4.stl
    • Doors/interior grab 1.stl
    • Doors/interior grab 2.stl
    • Doors/interior grab 3.stl
    • Doors/interior grab 4.stl
    • Doors/interior grab rear.stl
    • Doors/side window press L.stl
    • Doors/side window press R.stl
    • DXF/cab side windows DXF.dxf
    • DXF/front doors DXF.dxf
    • DXF/middle doors DXF.dxf
    • DXF/rear door DXF.dxf
    • DXF/windshield DXF.dxf
    • Exhaust/exhaust pipe (mirrored).stl
    • Exhaust/exhaust pipe collar.stl
    • Exhaust/exhaust pipe.stl
    • Exhaust/exhaust.stl
    • Exhaust/tail pipe (mirrored).stl
    • Exhaust/tail pipe.stl
    • Interior/dashboard mount.stl
    • Interior/dashboard skirt.stl
    • Interior/dashboard.stl
    • Interior/steering column.stl
    • Interior/steering wheel.stl
  • REVISED TRX4 MOUNTS.zip
    • Mount TRX4 L (revised).stl
    • Mount TRX4 R (revised).stl

Learn more about the formats
Last update 2023-07-19 at 03:13
Publication date 2023-06-21 at 04:22
Design number 1283074
ahead_RC

ahead_RC

3D printer file info

3D model description

PLEASE make sure your 3D printer is able to print a minimum size of 220x250x158mm. before purchasing.

The Crawler V303 is pure utilitarian. Whether it is for hauling cargo or passengers, this van will go practically anywhere.

Itโ€™s designed specifically to fit on SCX10 ii, SCX10 iii, VS4-10 Pro, and TRX4 chassis with a standard short wheelbase of 290mm, outer tyre to tyre width of 230mm and maximum tyre height of 110mm.

Feel free to check out our custom build here: https://www.aheadrc.com/v303

The short wheelbase makes it a very nimble and capable crawler with lots of all around ground clearance, especially when accurately paired with portal axles.Size comparisons of the V303 4x4 and Bog 406 are shown in the photos above, please note that that Bog 406 is sold separately.

Similar to our other body shells mounting the body to the chassis is made easy with the included body mounts, which are designed beefy, trail worthy, and with fore and aft adjustments.

Weโ€™ve gone with the traditional route and packed a ton of functional features and details in this design.
- All 5 doors have in-built function hinges, so no need to source your own hinges.
- Roof hatch can also be opened with the included hinges.
- Windshield can be flipped up or down just like in real life.
- Front bumper towing recovery pin
- Rear bumper towing hook.
- High clearance version of the rear bumper is included (without the hook and hook mount.)
- All light buckets are functional, use 5mm and 3mm LEDs.
- Interior door panels with handles.
- Sidesteps.
- Detailed exhaust system.
- Spare tyre carrier.
- Included fuel can and carrier.
- Detailed interior dashboard.

Please ensure your printer can print a volume of 220x250x158mm.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

Should you need any help, please do not hesitate to contact us!

3D printing settings

FDM printing:

Requires a printer that can print a minimum volume of: 220x250x158mm.

PLA+ filament
0.2mm-0.3mm (0.4mm nozzle) layer heights
20-30% infill density
Supports are necessary

Finished and assembled size:
525*218*177mm (All parts assembled excluding mirrors)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, โ€ฆ) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi ๐Ÿ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.