Skip to content

3d printer mount for adafruit clear case w/2.8" pitft display

pic3.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
3d_view_3.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
3d_view_2.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
3d_view.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
pic1.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
pic4.jpg 3d printer mount for adafruit clear case w/2.8" pitft display
pi_2020_mount_single_fan.stl 3d printer mount for adafruit clear case w/2.8" pitft display
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 368 views
  • 2 downloads
License
3D design format
Folder details Close
  • pi_2020_mount_single_fan.stl
  • readme.txt

Learn more about the formats
Publication date 2023-06-30 at 23:36
?
Published to Thingiverse on: 2020-09-24 at 21:33
Design number 1299994
johnpbutler

johnpbutler

3D printer file info

3D model description

I am fairly new so use my settings as a rough guide, only. Also this is my first contribution to thingiverse.

The mount was created using tinkercad.

I haven't found a good case design yet for the raspberry pi 3 with the 2.8" tft display. So I purchased one from adafruit. Links to case and cover are below:

case
faceplate

I created this to mount my adafruit case and faceplate for the 2.8" pitft display to one of the extrusion rails on the ender 5 pro.
Other cases might fit. But I don't know for sure.
Also there appears to be 2 versions of the display.
My display has the buttons on the left side.

Also, I have ordered a small fan to attach to this case and have made cutouts for airflow on the adafruit case with my dremel tool.
The fan hasn't arrive yet, so that part of the design has not been tested.
I ordered the fan(s) on amazon and here is the link

I used cura 4.7.1 to do the slicing. The filament is Sunlu Petg at .2mm layer height and .35 line width. My speed setting is 60mm/s and cooling fan speed is set to 35%.
Infill density is set to 40%.
I used supports with an overhang angle of 60 if that helps.
I also used a raft. Which I have used on everything when printing petg, so far.

Hope someone uses this and gives me feedback.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.