Acetone Vapor Chamber (AVS) 2.0

CUSTOMIZABLE, SIMPLE, CHEAP, BUILT IN ADJUSTABLE TIMER
PLEASE BE ADVISED ACETONE VAPOR BATHING IS A PRETTY
COMMON PRACTICE HOWEVER THE CHEMICAL IS STILL A
FLAMMABLE ONE, SO BE CAREFUL, TAKE PROPER PRECAUTIONS,
DON'T LEAVE IT UNATTENDED FOR LONG PERIODS, AND USE AT
YOUR OWN RISK.
I found it frustrating how you couldn't by an affordable version so I
decided to print my own, most of its construction materials can be
printed and found at home. The metal plate is just flattened aluminum. Use any 6 volt or less fan, just make sure it's not so strong as it blows the vapors out of the container, which doesn't have to be the 6" by 6" jar I bought at the container store so long as it is, 6" by 6" or less and made out of glass or recycling number 5 plastic, which it will have a little logo for on the bottom if applicable. And remember that if the rim is rounded, so if you go with a 6" by 6" container, it better be round or have rounded corners. Now the pary-platform can be made out of whatever you want so long as it's raised and the material is metal, glass, or a really strong plastic. Also you MUST get the linked heating element for this design, but the fam can be whatever kind you want, so long as it's 6 volts or less, even though, you can just take the one I linked down below if you prefer, although for me the fan blade didn't fit in the jar so I had to replace it with one of those cheap dc motor fans I got from one of those little kits online. It should go underneath the lid so that the airflow is directed directly onto your parts, making sure that the whole is tight enough that there isn't much extra room around the axel, so the vapors don't escape. Have fun, be safe!
Fan

0,1-0,2mm layer height, PLA, PETG, ABS, really anything, Support Yes, other than that, settings are really dealers choice.