Transformer Display System Beam Pack

These are various beams for the structures of Cybertron!
Included are:

• A male-male connector beam for single panel level structures, both 50 mm and 100 mm widths
• A male-female connector beam for multiple panel level structures, both 50 mm and 100 mm widths
• A female-female connector beam for under floor and wall reinforcement, both 50 mm and 100 mm widths
• A gusset "plate" piece for structures that have intermittent floors.
• 2 gusset "plate" pieces for walls and floors that have one way reinforcement
• A gusset "plate" piece for walls and floors that have two way reinforcement
• An end beam piece for the end of wall structures

This system of panels and connectors is designed for the building of dioramas for displaying transformer figures and toy photography. As a building system, it is infinitely expandable and has a number of 5mm ports and pegs for attaching blast effects or accessories.

Get the whole system here: https://cults3d.com/en/design-collections/Cybertronian_Re-engineering/transformers-display-system

Get cross beams here: https://cults3d.com/en/3d-model/game/transformer-display-system-cross-beam-pack

1 (square) panel is 100 mm x 100 mm.

More packs to come, and I'm open to suggestions on changes and what to add next!

With all pieces, sanding may be required for a good fit, depending on your printer and settings. Drilling maybe required to bring holes to designed size. Paint may affect final fit.

This model is not to be uploaded or sold in any form and is intended for personal use only. Other file formats may be made available upon request. Designing compatible accessories / parts is encouraged!

I printed this model in 1.75 mm PLA Plastic, with a .4mm nozzle filament printer. Different print orientations may vary results, sanding may be required after printing. Connector Pins and 3mm pegs require supports.