Umarex T4E XT68 X-tracer 68, M14 (14mm) CCW airsoft barrel adapter

this mount makes it possible to mount a tracer unit on a airsoft replica, that can also simulate gun flashes making also usable with normal paint at low light conditions it doesn’t have to be pitch black. but I don’t think there is a tat you will see it’s effects on a open field in the middle of the day. but in a building this should be a different story even during the day. but of course it will be more noticeable how darker it’s the gun flash simulation works on the fact that it lightens up the gas cloud a paintball marker makes. so the more air volume is going out of the marker and how more it forms a cloud the bigger the blast effect is. note this really a short blast. so if you blink you will mis it haha. and some times cameras happen to mis the shot. but well that is why you have more than 1 rounds haha…

normally is this tracer made to work on home defence or paintball markers that are 50cal. but these can also be used on a airsoft replica with the help of this adapter.

-

compatibility note
so this one is for replicas with a M14 CCW barrel tip or pistols in case they are used with a adapter like a M11 to M14 CCW

and Umarex T4E XT68 X-tracer 68 tracer unit.

also keep in mind that your safety “barrel plug” or barrel sock works with this set up

I will make a TIPX style of barrel plug that will fit this tracers and add it to the collection.

movie link:
https://youtu.be/Gj-XHxpkgTo
https://youtu.be/_P3jsdKkdq0
https://youtu.be/z_aTjp-OFms

-
Materials needed

1x O-ring 1.2mm CS, 28mm OD, this is placed behind the tracer mount threads

print settings:
0.2 layer hight will work fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

I recommend that you use the orientation I have placed the files in. it’s true it cost more supports this way but you will have good threats and that is want matters in the end.