1/24 SCALE MODEL CAR WHEEL V17

This includes 5 different rim diameters (18", 19", 20", 21" and 22" (19.2mm, 20.2mm, 21.2mm, 22.2mm and 23.2 mm at 1/24 scale)), and each in 2 different widths (approx. 9.5" and 11.3" (10mm and 12mm at 1/24 scale)).

This rim is made with my new axel system. This new system is what I will use going forward, because it makes it easier for me to make rims that will work with different model car brands. As soon as I get my hands on models from other brands I will make sure to push out the updated files. You will get notified when the new updates are made in the futures, so don't hesitate to get this model today.

Each wheel is made up of 3 parts. One part for the rim it self, the tire and the bolts. These parts have been made separate, to make it easier to paint. The bolts and the axel are now modelled into one part, so that this part can be interchangeable between different different brands.

These wheels fit perfectly on Tamiya plastic model cars in 1/24, and it has been tested on several models, the VW 1300 Beetle (24136) and the Mercedes-Benz 300SL (24338).
And they fit perfectly together with the set of brakes discs link I have made, originally also for my 1/24 model 300SL.

Please note that this model is NOT scaleable. The center axel might not work as intended if the model is scaled.

If you need some other sizes feel free to message me, and I will see what I can do.

Feel free to go and check out my profile for more printable stuff for your model cars and scale dioramas.

These models are not for comercial use. If you have any inquiries, then please take it with the designer of these models.

Recommended printing on a resin printer, at layer eights around 0.02-0.01mm for det best results.
These have been test printed at 0.02mm and on a 4K and 6K resin printer, with great success.