RUSH Clock

Rock on !!! Do you have a RUSH fan in your life ?

Make there week / year with this fantastic clock from the Canadian rock trio.

2 variation's for the clock design. Both 150 mm diameter / round.

One with a flat face & one with symbols embossed.

Clock can be wall mounted or printed with included guitar stand which also includes a litho of the legendary 3 piece.

Silent clock mechanism used

https://amzn.to/45sgo16

Clock hands were snipped down to size.

Light used for the stand

https://amzn.to/46pSHHS

Assembly;

Place bead of super glue around litho edge
place litho into housing and apply pressure for a minute until glue is set.
Push bulb into side hole
glue back plate onto box recess

Enjoy !!

If you would like to sell this as a physical model, please join my patreon: https://patreon.com/user?u=54229526

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

Bambu - Clock Raised - 0.2 layer - 8% Gyroid infill - [1 H 43 min]
Bambu - Clock Flat - 0.2 layer - 8% Gyroid - [1 H 40 min]
Bambu - Stand - 0.2 layer - 8% Gyroid - [3 H 16 min] - laid on back with tree supports
Bambu - Litho - 0.12 or 0.16 layer - 100 infill - 1 hour - laid flat
Bambu - Back plate - 0.2 layer - 16 min

Ender 3 - Clock Raised - 0.2 layer - 8% Gyroid infill - [5H 27 min]
Ender 3 - Stand - 0.2 layer - 8% Gyroid - [13 H 36 min] - laid on back with tree supports
Ender 3 - Litho - 0.12 or 0.16 layer - 100 infill - 1 h 50 mins - laid flat
Ender 3 - Back plate - 0.2 layer - 32 min

These are settings I used or would of used on the ender 3. Only there for a guide and I do recommend you to use your own.