Skip to content

magnet handle

magnets.jpg magnet handle
magnets_2.jpg magnet handle
cb2553d50584d355590666f69401d48b.png magnet handle
e6a53b5ecc7e46126f72700596dc35c2.png magnet handle
1cee3291c8523f4221cb51a532ec6f32.png magnet handle
eac1b3dde0be4f8873442cabddcc5a3e.png magnet handle
5d82983c28250df02e4612afb9e463ef.png magnet handle
round_magnet9.stl magnet handle
round_magnet12.stl magnet handle
square_magnet-holder.stl magnet handle
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 222 views
  • 2 downloads
License
3D design format
Folder details Close
  • round_magnet12.stl
  • round_magnet9.stl
  • round_magnet_handle.scad
  • square_magnet-holder.scad
  • square_magnet-holder.stl

Learn more about the formats
Publication date 2023-07-06 at 08:24
?
Published to Thingiverse on: 2019-06-18 at 03:37
Design number 1309177
ssd1

ssd1

3D printer file info

3D model description

I loved the original part, but it didn't fit well, and then I wanted to put larger magnets in too.
So here's a pair of parametric files for any size round or square magnet.

These are designed to be tight -- you can probably press fit the magnet into the wide end and it will probably stay once you get it in. However, the hole is tapered and gets a bit looser towards the other end. That way, once you get the magnet in, you can push it all the way to the bottom (with a rod for the small magnets). The bottom is only one layer thick (so your bed leveling needs to be good!) which puts the magnet very close to the end while still holding it in.

I made a plug for the round magnet, so you can press fit the magnet in and then press fit the plug in after it. Both the handle and plug are in the same part; I usually separate them in Cura and then print in one-at-a-time mode.

I didn't make a plug for the small cube magnet; I usually just run the extruder a bit with the tip in the hole and let it fill up. (Marlin "load filament" mode is about perfect.)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.