rollerblades keychain

Take advantage of this incredible opportunity to acquire a file for 3D printing of an innovative minimalist cartoonized roller skate! With this file in hand, you will be able to create your own unique and personalized pair of skates.

The minimalist design of these roller skates guarantees a clean and elegant aesthetic. With smooth lines and simplified details, the end result will be a visually appealing and modern pair of skates.

Here are the suggested 3D printing settings for the STL file of roller skates with dimensions of 4cm x 6.4cm:

Material: It is recommended to use PLA (Polylactic Acid) or ABS (Acrylonitrile Butadiene Styrene) to print the skates. These materials are widely used in 3D printing and offer a good combination of durability and ease of printing.

Layer Height: Set a layer height of approximately 0.2mm. This value will result in good resolution and a smooth finish for the skates.

Infill: A 20% to 30% infill will be suitable to provide the necessary structure and strength to the skates.

Printing Speed: For best results, set a moderate printing speed, typically between 40mm/s and 60mm/s. This will help ensure good layer adhesion and precise details.

Nozzle Temperature: The nozzle temperature may vary depending on the type of material you are using. For PLA, a recommended temperature range would be 190°C to 220°C. For ABS, set the nozzle temperature between 220°C and 250°C.

Print Bed: Use a suitable print bed surface, such as a heated bed with a specialized 3D printing adhesive tape or a glass plate with proper adhesive application. This will help ensure good material adhesion during printing.

Please note that these settings may vary depending on your specific 3D printer and individual preferences. It is always recommended to perform some test prints and make adjustments as needed to achieve the best results.