Monitor stand

The monitor stand is a smart solution to optimize his desk. I use here a 4 mm safety glass plate with the dimensions 750 mm x 300 mm. It is all dimensioned so that a laptop with keyboard and mouse can fit comfortably underneath.

In my wife's small office, the space must be used as efficiently as possible and so I came up with the idea for this monitor stand, so it was born out of the need to make work surfaces more efficient and save space.

I ordered the glass top from https://expresszuschnitt.de for about 15 euros, so here you have a chic, functional and self-made monitor stand.

In addition, I came up with the idea to integrate LED's as eyecatcher with.

I wish you a lot of fun.

material=pla+

bottom_layers = 3

brim_line_count = 3

fill_outline_gaps = True

infill_overlap = 10.0

infill_pattern = lines

initial_layer_line_width_factor = 120.0

ironing_enabled = True

ironing_only_highest_layer = True

ironing_pattern = concentric

line_width = 0.4

material_initial_print_temperature = 230

material_print_temperature = 210

material_print_temperature_layer_0 = 230

retraction_hop_enabled = True

skirt_brim_minimum_length = 150

skirt_line_count = 3

speed_infill = 100.0

speed_layer_0 = 40.0

speed_print = 80.0

speed_support = 80.0

speed_support_interface = 60.0

speed_travel = 150.0

speed_wall_0 = 30.0

speed_wall_x = 60.0

support_angle = 60

support_pattern = triangles

top_bottom_pattern = concentric

top_layers = 3

wall_line_count = 2

z_seam_corner = z_seam_corner_weighted

z_seam_type = sharpest_corner

zig_zaggify_infill = True

adaptive_layer_height_enabled = True

adhesion_type = skirt

bridge_settings_enabled = True

layer_height = 0.24

layer_height_0 = 0.3

material_bed_temperature = 60

material_bed_temperature_layer_0 = 80

retraction_combing = off

support_enable = True

support_structure = tree