Four Lens Update for Spider-Man Away from Home 2.0

!!! Attention !!! !!! Attention !!!! !!! Attention !!!!

!!! Only for experienced users!

YOU DO NOT BUY READY-MADE MASK

NO SE COMPRA UNA MÁSCARA YA HECHA

NÃO SE COMPRA UMA MÁSCARA PRONTA A USA

VOUS N'ACHETEZ PAS DE MASQUE TOUT FAIT

NON SI ACQUISTA UNA MASCHERA GIÀ PRONTA

YOU DO NOT BUY A COMPLETE SET FOR 3D PRINTING A MASK

YOU ARE BUYING AN UPGRADE, READ THE DESCRIPTION CAREFULLY.

NO ESTÁ COMPRANDO UN KIT COMPLETO DE MÁSCARA IMPRESA EN 3D

ESTÁ COMPRANDO UNA ACTUALIZACIÓN, LEA ATENTAMENTE LA DESCRIPCIÓN

YOU DO NOT HAVE TO BUY THE COMPLETE MASQUE IMPRIMÉ KIT IN 3D.

IF YOU WANT TO BUY A MISE EN JOUR, PLEASE READ THE DESCRIPTION CAREFULLY.

DO NOT BUY A COMPLETE MASCHERE STAMPATE KIT IN 3D

STATE ACQUISTANDO UN AGGIORNAMENTO, LEGGETE ATTENTAMENTE LA DESCRIPIONE

NÃO ESTÁ A COMPRAR UM KIT COMPLETO DE MÁSCARA IMPRESSA EM 3D

ESTÁ A COMPRAR UMA ACTUALIZAÇÃO, LEIA ATENTAMENTE A DESCRIÇÃO

!!! There is no front cover, read carefully what is included in the description !!!

          !!! TUTORIAL !!!  https://www.youtube.com/watch?v=V-8i2VyCQeg

update for this product https://www.etsy.com/listing/1177709602/spider-man-away-from-home-20-with?click_key=70d616ece829713ffab68dd986dc2e9abd1daac5%3A1177709602&click_sum=521b3b16&ref=shop_home_active_1&crt=1&sts=1

Hello all!

I present you the update for

Spider-Man Away from Home 2.0 with mechanical lenses . files for self-assembly on a 3D printer

Now you have the possibility to remake the lenses on your mask , you had 2 movable lenses on the left and right ,

Now you can make 4 lenses on the left and right side

What do you buy?

Files for 3d printing .

1) Servo housing with mechanics , gears , slides , rods . for the MG90s servo and for the SG90 servo.

2) outer lenses and their templates

3) Movable lenses with holes and without holes

4) Moulds for Mechanism Holes

5) Cover for arduino pro mini , cover for the button , wire holder , cover for the infrared sensor , housing for the infrared sensor .

6) Templates for the lens

Printing options

Slider Cura4.10.0

1) PETG plastic

2) nozzle 0.4

3) layer height 0.2

4)speed 60

5) nozzle temperature 230

6) table temperature 60

7) filling 96

I put the files for advanced users and will start to mount the tutorial , as soon as the tutorial is ready you will know about it on my instagram

Later on there will be a full version of this mask with a quadruple lens

with a slightly modified mask and the correct holes for fixing the mechanism

You can decompress the files with 7zip , you can download them for free on the Internet from the off-site

if you have any questions do not hesitate to contact me

good luck building it !!!

CURA slicer 4.10.0

nozzle 0.6

nozzle 0.4

PETG plastic

table temperature 60

nozzle temperature 226

speed 60