Ring Toss Party Game

My almost entirely 3D printable ring toss game

Game rules:

The king starts in the center of the board each player tries to simultaneously put the ring on the hook, the player who manages to put the ring on the hook moves the king in the direction of the opponent until it leaves the board and said player wins the round

Excellent game for gatherings with drinks, the player who loses must have a drink

If one of the hooks breaks it can be easily printed and replaced

Almost everything is printable, it only requires a thread of approximately 1mm in diameter, 2 metal rings from the hardware store, two round neodymium magnets 1.5mm high and 4mm in diameter, a 45mm M4 screw to hold the base and super glue

The dimensions of the assembled game are: 31.7cm HIGH, 35cm WIDTH and 10 DEPTH

The button magnet is placed at the end of the BOLT HOOK and CAP BOLT piece.

The fitting tolerances are 0.5mm for the larger pieces and 0.3mm for the colored trims. It includes two pieces to calibrate its horizontal expansion (TOOL 1 and TOOL 2) and know beforehand if it will be able to fit the pieces easily

The ropes should be tied in a knot at the end and slipped through the grooves to the center

Any questions leave me a message

Licensed for private use only! For the sale of any type of design of my property, contact me to negotiate a price

Settings:

Layer height: 0.1-0.2mm (0.16mm)

Nozzle: 0.4mm

Outer layer: 2 or 3

Infill: 15-25%

The hooks should be made as full as possible.