Tiger Dragon
$6.00 Tiger Dragon
Published 2023-07-11T10:18:42+00:00
A tiger with a bit of a dragon flair! This design has been on my mind for quite a long time now and Its finally done! ^_^
They're designed to print mostly in place (the head peg and tail will need to be glued into the body) and as usual NO supports are needed.
*Updated to include a version with the body and tail combined. Make sure to print this version at 100% or larger (It is set to 75% of the original versions size) !
There are 2 head options that can be swapped out for which ever look your going for. I've also included multi color .3mf files for those that have the capability. There are also 2 patterns to choose from. The traditional tiger look and one that I had some fun with. That one has 2 options so that you can change the fur color.
The white one was hand painted with acrylics and the orange one was printed on a bambu p1p with ams.
---
Please feel free to share images of your prints, I would love to see what you do with them! ^_^
---
All my models are for personal use only. You may never redistribute or sell my files in any way.
If you are interested in selling 3D Prints of my models, you may acquire a commercial license through my Tribes or Patreon.
By joining you will also get Three (3) free model releases per month, exclusive subscriber only models, and a 50% off discount code to MysticSaige MyMiniFactory store! Stop on by and check it out!
Happy Printing!!
It Prints-Mostly-in-Place and NO Supports are needed!
3+ perimeters (the more the stronger it will be).
15%+ infill.
Have bridge settings enabled.
Make sure to have good bed adhesion or use a brim/raft.
Great in PLA!
Has not been tested for resin printing.
Date published | 11/07/2023 |
Price | $6.00 |
Support Free | YES |