UNIVERSAL Honeycomb Stackable Center & Riser Jigs [3D printable files]

NOTE: Compatible with ALL regular honeycombs of any size and virtually all laser engravers from any brand. Truly universal!

Do you want the freedom of having your honeycomb bed easily raised at different heights whenever you need it without too much hassle or are you using a Rotary or Chuck Adapter in combination with just flat cutting/engraving and don't want to break up and rebuild your setup every single time ?

Then here you go: a set of simple yet effective honeycomb center and riser jigs... Designed to fit 99,9% of the honeycombs in the market with the option to screw them to your workbench for permanent centering of your honeycomb bed. You have the ability of just using the base center jigs to keep your honeycomb bed entered for flat engraving or go high and add any combination of the included risers (20, 40 and 60mm) - print as many as you need - to lift your honeycomb bed up as high as you like.

Instructions/notes:

Compatible with ALL regular honeycombs. Print the included STL files to cover every corner. There are even optional stackable side supports included in case you use a large honeycomb, i.e. for an extended setup or if you just want to make it even more stable.

Filament: any sturdy filament (PLA is fine)
Infill: 15% or higher
Layer height: 0.2mm
Nozzle: 0.4mm
Supports: No.
Raft: if needed.
Brim: if needed.