Yesoul S3 VESA Mount

###UPDATE###

I am working currently on a compatible phone mount and may improve this design in the future. I guess replacing the whole arm is a good idea but in the meantime this is already quite suitable. If you have ideas please share.

#############

I had the idea to pimp the Yesoul S3 / Jasport S3 which is a great home trainer a bit. With the parts in this design you can mount any monitor an the bike which you can connect to a computer and for example run Zwift or Kinomap which the bike is compatible with.

I wanted to leverage existing parts and make the monitor easy to remove to also use the bike with phone or tablet as usual.

To install, simply slide the left and right part of the monitor mount together. Use 4 M4 screws to mount it on the monitor and slide it in. This already works perfectly.

However, I realized that the tablet holder is not really made for the load of a monitor (what a surprise) so I also printed some reinforcement parts that would keep it in place. To install these you need to remove the 2 screws that hold the display mount. First slide on the main part and then the two side caps which you fix again with the two screws. They don't have to be super tight. Its probably better to switch them with longer screws but for me it worked out that way. The monitor should be in a nice 45 degree angle perfectly for a ride.

I am working also on a compatible phone mount which I plan to share.

If you enjoy this it would be great if you could give me feedback in the comments, a like and post a make if you did this.

Ride on!