Gothic Vampire Coffin Wall Lamp for LED Strip Lights Halloween Decor

This vintage toe-pincher coffin wall light is the perfect addition to any Halloween-everyday home decor. It makes a frightfully fun holiday decoration or a great gift for that dark and gloomy Goth friend you are afraid to go shopping for. Ha-ha!

The wall light prints out in three pieces - the front, back, and inner light shade. It is easily assembled with a small LED strip light. You can print the shade in whatever color you want the light to illuminate, or print it in white and use multi-color light strips.

COFFIN WALL LIGHT PRINTING & ASSEMBLY
There are three STL files in the coffin wall sconce pack. they include:

• Coffin Light - Front
• Coffin Light - Back
• Coffin Light - Inner Shade

The Front and Back panels should be printed in Black. If you're using colored or color-changing LED lights, print the Inner Shade in white. Otherwise, p[rint it in whatever color you want the light to glow.

Start by gluing the Inner Shade onto the inside of the Coffin Front. Make sure it covers the entire cut-out of the cross. While that's drying...

Use a 1-meter USB-powered LED light strip to illuminate the wall lamp. If your lights have a remote control, make sure the remote sensor is sticking out the bottom hole of the coffin.

Start the light strip just inside the hole and adhere it to the outside edge of the Coffin Back (see pictures for reference). Encircle the entire coffin. When you get back to the opening, then run the rest of the light strip around the inner wall of the coffin. If there is any extra light strip remaining, leave it inside the coffin base.

Make sure everything works properly, then glue the Front and Back panels together. Let it dry completely. Now you're ready to hang your new creepy casket wall light! There are two beveled holes in the back to fit nails or screws.

DIMENSIONS
The Gothic coffin lamp should be printed at 100% to ensure the nail holes and light strip opening don't become too small. You can increase the size if you wish, but you may need a longer strip light to go around the inside and outside of the coffin's edges.

At 100% and fully assembled, the Coffin Wall Sconce measures:

X = 13.1cm / 5.6in
Y = 20.0cm / 7.9in
Z = 2.9cm / 1.15in

If you like our Decorative Coffin Wall Lamp, please check out our other GetPrinted3D Creations on Cults3D (including many more Gothic / holiday themed items!)

• https://www.cults3d.com/en/users/GetPrinted3D/creations

IMPORTANT Copyright Info Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial License to legally sell our designs here:
- Patreon.com/GetPrinted3D

Enjoy!

This is a very easy print. you won't need supports or rafts for any of the STL files. Since all of the pieces are flat, you can print them at lower-quality resolution and relatively high speed.

We used and recommend the following slicer settings:

Layer Quality / Resolution: 0.2
Walls / Shell: 3
Infill: 20%
Speed: 80mm/sec
Supports: No
Plate Adhesion: None