2nd Edition Token, Dice, Card, Template Box STL for 3D Printing

This is a STL for a magnet-ready token, dice, card and template box designed to contain those items from the 2nd Edition boxset released in October 1993. If you're not sure which game that is, check out the photos.

It comes with a plain lid and a lid with the shown text recessed (and the opposing file if you feel like doing a dual colour print sans MMU). It fits in the original cardboard box that the 2nd. Ed. set came in.

It fits on a 300x300mm bed or larger, unless you want to cut it. Prusaslicer has some pretty good cutting functionality nowadays but I have not tried that myself. Dimensions are:

Base: 275x299x30.4mm

Lid: 275x299x22.2mm

Dice/token insert: 56.5x283x21.7mm

When assembled the overall height is under 50mm.

This is a 3D printable STL and no physical product is provided. No tokens, dice, cards or templates - or their STLs - are included. Tokens, dice, cards and templates that fit in are all shown. Token list:

1x turn counter
2x Imperial Aquila counters
2x Ork glyph counters
2x out of control counters
6x run counters
6x hidden/detected double sided counters
6x flamed counters
9x recharge/broken double sided counters
12x speed counters (4x slow speed, 4x combat speed, 4x fast speed)
12x jam/overwatch double sided counters
12x wound counters (4x 1 wound, 4x 2 wound, 4x 3 wound)

Licensed for personal use only, drop me a line if you want to print it commercially.

FDM, 0.3mm layer height works just fine