CZ Shadow ASG KJW replica - Laser Barrel for realistic Dry Fire with recoil

This barrel replaces the stock barrel for CZ Shadow 2 replica from ASG / KJW.

The gas jet will be sufficient to activate the laser, I recommend the use of dry gas or co2, the silicone oil could impregnate the laser. The laser must be for 9mm pistols. You will also find an adapter to not activate the hold open and a 'pusher' that will remove and press the cartridge into the barrel.

The barrel is replaced without modifications to the original one. I use this system a lot to train with Dry Fire Online or similar laser apps, but simulating the recoil inside the house and in safety. There are certainly better systems but in my opinion they are too expensive to be worth the purchase.

See the video for installation.

1° NOTE: it is known that the laser with the muzzle in motion is less stable than the stationary pistol so I suggest training with a projector and a large screen or in any case with a large target because the laser will oscillate about 2-3 cm on the impact surface. If you use the Dry Fire Online app it is important to adjust the Zero point.

2° NOTE: this is for only private use. I'm a creator and I'm selling this already printed in other places.

I printed the barrel in PLA pro and works perfectly, but the ideal should be print it in PC. You can try some filaments.

Follow the organic supports like the pic and use this setting:

Layer height 0.12 or 0.2 max
Line width 0.45
perimeters 6
Nozzle 0.4
Infill 80% (I recommend a 50% infill minimum)