KS3VEH04 - Ziltek -T-Sedan
$1.00 KS3VEH04 - Ziltek -T-Sedan
Published 2023-06-28T00:12:36+00:00
The Ziltek -T- Sedan was made upon request by Jim & Lee Kearney for their Aethertowne Build. After sharing pictures of their amazing setup, we simply could not say no. The -T- Sedan features multiple options for a modern transport / taxi / hotrod / outlaw conveyance.
Colin Christenson, the project director for the Sky Islands 1 Campaign, took the initiative in making these models and the requested remixes of the base sculpt. Colin is as passionate about filling customer requests as he is about authenticity. We hope you agree that his dedication shows through in this set and that these models find a treasured place on your table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
Date published | 28/06/2023 |
Price | $1.00 |
Support Free | YES |