The Jigabachi AV is a cutting-edge optionally manned aerial vehicle. A type of advanced AI anti-tank helicopter that can be operated remotely, autonomously or by AI-assisted human pilot. As of 2030 it is in active service with both the JSDF and MSDF in anti-tank, anti-cyborg and littoral combat roles. 

Jigabachi AV comes equipped with wing mounted anti-tank guided missiles, anti-air missiles, laser guided rockets and a 20mm rotary cannon housed within a singer-like articulating module. The name 'Jigabachi' (ジガバチ) comes from a type of digger wasp in Japan whose prey includes spiders.

Comprised of 8 microscale parts, the kit contains a single helicopter configurable in 3 modes: Gear Down, Gear Up and Attack Mode. And if that isn't cool enough, both the Abdomen and Rotary Gun parts are fully positionable, allowing you to pose this little wasp to your hearts content.

Kit contains 8 parts:

Jigabachi AV Fuselage
Jigabachi AV Rotor
Jigabachi AV Stinger Module
Jigabachi AV Rotary Cannon
Jigabachi AV Left/Right Gear Up
Jigabachi AV Left/Right Gear Down

Pre-Supported .stl files
Unsupported .stl files

The included .stl files have been extensively test printed, designed for 1/285 (6mm) scale wargaming and resin printers. All files are watertight, so can also be printed in filament. Easily up-scaled to 1/100 (15mm) by simply increasing the scale of the .stl files 230% in your chosen slicer.

All 6mm mecha stand roughly 35mm-50mm tall, depending if its a light, medium or heavy-class mech. Upscaling a medium-class 45mm tall mech to 15mm will give you a mecha standing roughly 100mm tall.