BMW Replica Badge

Replica BMW Badge modelled true to size. The package includes two versions:
1. Base Version: This version contains the standard BMW badge without any additional features that are not included in the original badge.
2. Offset Version: This version features the circular BMW pattern and the 'BMW' lettering in Arial font. The offset design aims to mimic the authentic appearance of the BMW badge accurately.

I recommend utilizing an infill setting of 20% for the majority of the print [base] to strike a balance between print times and material usage, ensuring sufficient strength while avoiding excessive consumption of print material. It's worth noting that higher infill percentages do not necessarily result in linearly increased strength; instead, they can enhance flexibility.
However, for the pins, utilize an infill setting of 100% to ensure they do not snap within the insertion badge holes of the BMW. If you don't know how, I've attached a link below to my video and the person who introduced this to me. [1] [https://www.youtube.com/watch?v=_CVsCF3fUUQ] [2] [https://www.youtube.com/watch?v=kQlkfbzTpI8].
For support removal, I suggest utilizing a 10% support infill. However, it's important to note that the ideal support infill percentage can vary depending on the specific printer being used. As a general guideline, 20% is considered a standard infill setting.
Most settings are entirely printer dependent. Prints were conducted at a speed of 60mm/s which last around 4 hours.