DEAD RECKONING CRUCIFORM KEY (MOVIE ACCURATE) - MISSION IMPOSSIBLE - ETERNAL

Replica fanart of the Cruciform Key from Mission Impossible - Dead Reckoning

BIO: This Key unlocks the vault inside the sunken Sebastopol russian submarine, wich holds the source code that can kill The Entity.

This model has been designed for 3D printing and comes with TWO VERSIONS:

-Version ONE: full set of keys with the gems attached, each half complete in one piece
-Version TWO: Full set of keys with the gems in a separate file. You can print this gems in transluscent red and white filament or for better results, you can source the gems from a diy jewlery kit. You may need to glue the gems together.

All files are pre-positioned for the best results in an FDM printer. The parts are pre-positioned vertically, in order to get the most detail on the key's surfaces.

For resin printers this orientation can be changed as you like.

File format: STL
Level of detail: High

The parts have matching sockets to join them, you can glue some of them if you see fit.

The model of the keys comes scaled approximately in real size for cosplay, an can be printed on an Ender 3 Pro or similar, or any resin printer. Of course, you can re-scale the parts for your printer to the size you like.

DISCLAIMER: My prints were tested in Simplify3d, Chitubox and Cura with 0.20 mm layer height with 3 perimeter walls and 15% infill to have some room for sanding & avoid fragile surfaces.
I offer no support for the actual printing process.
Having to adjust angles of the model & sanding the print itself is a normal part of the process while making a statue like this.