Brushless WHOOP 65mm 24g or 64mm 21g!

Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the latest technology. The smaller they are the funner they are to fly inside.
The 65mm 2s 40mm prop design has quit a few changes and rips it up inside and out. Both versions are built around the 36x36 all in one FC design. I like the BetaFPV F4 1s or 2s Brushless Flight Controllers (Frsky RX) the best.

The frames are only as strong as the material you print them with.
I only use MatterHackers NylonX. I haven't been able to break a frame yet. I can only bend them, but I don't abuse my quads I fly pretty conservatively I guess you could say indoors. I have indestructible frame designs (thicker frames and guards) but of course they weigh more. PM me if you would like a thicker STL file.

With the parts listed below you can accomplish the following weights:

64mm Whoop with 31mm props 21g awg! THE FRAME ONLY WEIGHS 4g!
65mm Whoop with 40mm props 24g awg! THE FRAME ONLY WEIGHS 4.3g!

FIRMWARE: I installed the following settings using Betaflight 3.5.4 (not entirely sure the Mockingbird settings will work on firmware above 3.5.4). After PID tuning to the Mockingbird settings YOU WILL NEVER LOOK BACK!!
https://docs.google.com/document/d/1Wi1RWihq1UWk1HpdzKoa0ajkLMpaYqFRaZOUaXbTtgc/mobilebasic#!

PARTS LIST:

FLIGHT CONTROLLERS:
BetaFPV F4 1S or 2s Brushless Flight Controller (Frsky RX) 4g
CrazyBee F3 Pro works as well 4g

Power pig tail Solid pin JST connector, makes a HUGE difference in eliminating voltage sag.
https://www.digikey.com/product-detail/en/jst-sales-america-inc/B2B-PH-K-S-LF-SN/455-1704-ND/926611

CAMERA AND VTX:
"TURBOWING CYCLOPS2 FPV 700tvl Cmos Micro Cam" mixed with the
"Crazepony Micro AIO Caddx Firefly VTX" with smart audio (this is the lightest camera and VTX matchup on the market right now) 3.5g (The prop Guard is designed to only fit this camera and VTX) you can change it of course and make your own design.

MOTORS:
BetaFPV or HappyModle 0603 1S 16000kv-19000kv Brushless Motors 1.6g
BetaFPV or HappyModle 0802/08031s-2s 16000kv-19000kv Brushless Motors 1.9g

NOTE: Has no authority with 0603 motors and 31mm props unless you follow the steps to adjust your throttle curve in the following link.
https://rotorbuilds.com/build/11310.

NOTE: The HappyModle 0603 and 0802 or 0803 will use the 0802 frame because they have the same bolt pattern.

PROPS:
Props for 31mm:
RKH 31mm 3 Blade Clear (had to drill to 1mm if using BetaFPV motors)
HQ Micro Whoop Props 31mm 1mm shaft

Props for 40mm:
RKH 40mm 3 Blade Clear 1mm shaft

HARDWARE:
All 2M plastic screws cut to size (other than the metal screws that come with the motors)

FILAMENT:
The frames are printed with "MatterHackers NylonX" and the battery holder is printed with "Flixifil FormFutura"

You can find more pictures of the 64mm Whoop build on Rotorbuilds.com
https://rotorbuilds.com/build/18031

Happy flying everyone!