Bowling trophy

A perfect bowling trophy as a prize for the winner in competitions! In my case I have used it as a prize for whoever won a bowling game I did with some friends.

Composed of 5 pieces that form this trophy measuring 12 cm high (can be increased in size if desired).

Among them are:

• The base

• The ball

• Ball

• 2 parts of the poster, the one that sticks to the base and where the winning letters are.

All parts once printed have to be glued together with glue. In addition, it must be taken into account that two of the pieces there are, among them the bolo and the part of the poster with the letters, have to be printed with different colors per layer, applying in this case the following changes:

On the bolo, when it reaches the red lines (you can see by a slight shift inwards) you have to put the color change, and do the same to put again the white color, again the red and finally the white for the highest part, 4 changes in total.

In the poster you have to make the color change when you reach the layer where you start to make the letters (in my case I have put them in red color).

If you have any questions about the design or how to do the printing and assembly procedure, do not hesitate to write me privately.

• Layer height: 0.2

• Filling 30%.

• Material used: PLA

• Use of balsa used in the bolus

• Color changes in the bolus and name sign.