Ajustable phone holder, Tablet holder

Phone holder and Tablet holder with adjustable angle. The model is designed by me, and has four adjustable positions in which you can hold your phone or tablet. The model is easy to print!Look carefully at the 4 print screens where you can see both the correct printing position of the parts and all the details related to the thickness of the walls, infill, support, etc... There is a position where you can hold the phone in the vertical position (usually to type and to search the net) and three more positions in which you can place your phone horizontally (to watch movies or play games).The tablet holder has four positions in which you can hold your tablet only in a horizontal position! At the phone holder I made the top part in two versions, one for the phone with a thickness of 10 mm and one of 12 mm. In the front, you can mount one of the two versions of the logo: android or apple.Enjoy!

The base :
infill: 100%
Perimeter: 3
Support: yes
layer height: 0.2
Top part:
infill: 25%
Perimeter: 3
Support: yes
layer height: 0.2
Small parts:
infill: 100%
perimeter: 10
brim: 4mm
layer height: 0.2
support: no
the logo:
put pause print from your slicer to can change fillament color
infill: 100%
support: yes
ironing top surface
layer height: 0.15