MK23 suppressor

This is third suppressor I made and finally it's working just fine. It contains of two parts: flash hider and actual suppressor, you attach suppressor to the flash hider with two screws that you can find in high cap mags. Mounting this suppressor can be a little tricky and that's why you can connect these two parts in 8 ways. How to mount the suppressor? Take the flash hider and screw it on the barrel, it doesn't have to be very thight, now mount the suppressor on the flash hider and chck if it points forward, if not, take off the suppressor, turn the flash hider a bit and repeat whole proces, it may take some time but it has to point forward. If my gauge works fine, this suppressor reduces noise from 95 dB to 83 dB (using bbs, it doesn't work that well while dry fireing). Sorry for lack of short video and photos but currently I am unable to add them.

Check out my suppressor made to use foam, it's more efficient, but requires making infill: https://cults3d.com/en/3d-model/game/mk23-suppressor-silencer

Layer height: 0.2mm or less
Infill: 25% at least
Supports:
- flsh hider - don't touch the file, use supports only touching buildplate and make sure that you don't have any supports on the thread
- suppressor - don't touch it either, you can use supports only touching buildplate but it's not necessary, you can print it without supports at all, make sure that you don't have supports inside the suppressor
walls, tom/bottom: 0.8 or 1.2 mm
Horizontal expansion: -0.05mm
use PET-G