Airsoft gearbox

This is a gearbox for airsoft guns. I mean you can create airsoft gun based on this gearbox. It's modified gearbox from SMG V5 made by "iozjik". It's just aother gearbox that works just like any other gearbox so I won't tell what to put where, if you are not sure, open "HOW_TO_ASSEMBLE" file. To make it work you need (by saying "standerd" I mean TM v3/v2 gearbox standard):
- standard piston, cylinder, tappet plate, cylinder head and AEG spring
- standard gear set with short type motor and AK/G36 motor spring
- AK type nozzle
- V3 gearbox anti-revers lever spring
- 7mm bearings
- standard tappet plate spring
- M3 hex screw with circle plate to push motor
- a few M4 screws with nuts for them
- a few M3 srews (three for hopup chamber and one to hold tappet plate spring).
You may remember that I wrote here that I am working on something that uses this gearbox. If you don't, well... I worked on a 3d printed lmg replica, pkp to be exact. I made a working prototype but it was made in tinkercad so the model wasn't very good-looking. However it worked and it just looked like a pkp. Now I can use fusion 360 so the quality of the designs is much heigher. I don't want to post a file that is almost as blocky as minecraft. I could try to remake it but... I need time that I don't have at the moment. You can try to build your own airsoft gun using this gearbox, it's just a simple box (outside) but don't expect me to finish this project, as I said I don't have enough time for it.

Layer height: 0.2mm

Infill: 40% at least

Walls, Top/Bottom: 2mm at least

Use PET-G

(for every part)