Jig Saw Handle (Jig Saw handle)

English:

Hello everyone! Today I bring you a handle to be able to use the jigsaw blades as a DIY blade. This handle consists of the following:

• 2 printed parts (Handle.STL or Handle_v2.STL and Saw Holder.STL). The difference between Mango and Mango_v2 is that the first one is more robust than the second one and that the second version has my logo and an ergonomic support for the thumb.

• 2 Screws: 1 M4x10mm Allen head screw and 1 M3x6mm screw.

• 1 hexagonal nut M3

• 1 hex nut M4

• 1 M4 bronze insert

In case you have M4 hex nut, then print "Porta Sierra_hex.STL".

In case you have M4x5mm bronze insert, then print "Porta Sierra_insert.STL".

The parts have a clearance of 0.1mm, in case they do not enter well, please sand with 800 grit waterproof sandpaper.

The M3 bolt is used to fix the saw blade so that it will not have any vibration while in use.

In the pictures is well detailed the assembly of this contraption.

Greetings to all!

Español:

Hello everyone! Today I bring you a handle to be able to use the jigsaw blades as a DIY blade. This handle consists of the following:

• 2 printed parts (Mango.STL or Mango_v2.STL and Porta Sierra.STL). The difference between the Mango piece and Mango_v2 is that the first one is more robust than the second one and that in the second version it has my logo and an ergonomic thumb rest.

• 2 Screws: 1 M4x10mm Allen head screw and 1 M3x6mm screw.

• 1 M3 hex nut

• 1 M4 hex nut

• 1 M4 bronze insert

In case you have M4 hex nut, then print "Porta Sierra_hex.STL".

In case you have M4x5mm bronze insert, then print "Porta Sierra_insert.STL"

The pieces have a clearance of 0.1mm, in case they do not fit well, please sand with 800 grit water sandpaper.

The M3 bolt is used to fix the saw blade so that it does not have any vibration during use.

In the images the assembly of this device is well detailed.

Greetings to all!

English:

-The two parts must be printed in hard filament (PLA, ABS, ASA, Nylon, PC).

-Use layer height between 0.16mm and 0.2mm.

-Use "smoothing" or "ironing" on the last layers of all parts so that they can slide better.

-No parts need to be supported.

-The part "Mango.STL" must be printed vertically.

REMARKS:

Calibrate your printer well as the clearance between parts is 0.1mm. In case the part "PortaSaw.STL" does not fit in "Mango.STL", sand all surfaces of the part "PortaSaw.STL" with 800 grit sandpaper.

English:

-The two pieces must be printed in hard filament (PLA, ABS, ASA, Nylon, PC).

-Use layer height between 0.16mm and 0.2mm.

-Use "smoothing" or "ironing" on the last layers of all the pieces so that they can slide better.

-No part needs support.

-The piece "Mango.STL" must be printed vertically.

OBSERVATIONS:

Calibrate your printer well since the gap between parts is 0.1mm.

In case the "Porta Sierra.STL" part does not fit into the "Mango.STL", all the surfaces of the "Porta Sierra.STL" part must be sanded with 800 grit sandpaper.