Skip to content

Haunted House 2 Bundle

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 53.7k views
  • 544 likes
  • 296 downloads
  • 8 collections
  • 10 comments
  • 27 makes
License
3D design format
ZIP Folder details Close
  • fd -HAUNTED HILL pdf Docs -v03.zip
    • fd - HAUNTED HILL Instr -v02.PDF
    • fd -HAUNTED HILL Mat used -v02.PDF
  • fd -HAUNTED HILL stl files -v03.zip
    • BASE/fd -BASE FRONT LEFT -v01.STL
    • BASE/fd -BASE FRONT RIGHT -v01.STL
    • BASE/fd -BASE REAR LEFT -v01.STL
    • BASE/fd -BASE REAR RIGHT -v01.STL
    • BASE/fd -BIG FRONT PUMPKIN PILLAR -v01.STL
    • BASE/fd -ENTRANCE PAVEMENT -v01.STL
    • BASE/fd -GRAVEYARD FLOOR SUPPORT -v01.STL
    • BASE/fd -HILL STAIRS -v01.STL
    • BASE/fd -REAR BASE PILLARS -v01.STL
    • BASE/fd -VERTICAL BASE PILLARS -v01.STL
    • BASE/fd- DIAGONAL BASE PILLAR -v01.STL
    • GATE & FENCES/fd -CEMETERY FENCE -v01.STL
    • GATE & FENCES/fd -ENTRANCE FENCES -v01.STL
    • GATE & FENCES/fd- GATES -v01.STL
    • GRAVEYARD/fd -ENTRANCE GRAVE STONE SIGN -v01.STL
    • GRAVEYARD/fd -ENTRANCE GRAVE STONE SIGN Blank -v01.STL
    • GRAVEYARD/fd -GRAVE STONE 4 -v01.STL
    • GRAVEYARD/fd -GRAVE STONE 1 -v01.STL
    • GRAVEYARD/fd -GRAVE STONE 2 -v01.STL
    • GRAVEYARD/fd -GRAVE STONE 3 -v01.STL
    • GRAVEYARD/fd -GRAVEYARD FLOOR -v02.STL
    • GRAVEYARD/fd -GRAVEYARD LANTERNS -v02.STL
    • GRAVEYARD/fd -SCARY DEAD TREE -v02.STL
    • GRAVEYARD/GRAVE LUMIER.STL
    • PUMPKINS & DEVIL/fd -DEVIL -v01.STL
    • PUMPKINS & DEVIL/fd -PUMPKINS -v01.STL
  • fd -HAUNTED HOUSE 2 pdf Docs -v04.zip
    • fd -HAUNTED HOUSE 2 Decorations layout -v01.PDF
    • fd -HAUNTED HOUSE 2 Instructions -v02.PDF
    • fd -HH2 -Materials used -V03.PDF
  • fd -HAUNTED HOUSE 2 stl Files -v02.zip
    • GHOST/f d -HH2 -GHOST EYES & MOUTH -v01.STL
    • GHOST/f d -HH2 -GJOST BODY -v01.STL
    • HOUSE WALLS & BASES/fd -HH2 -HOUSE BASE -v01.STL
    • HOUSE WALLS & BASES/fd -HH2 -HOUSE TOWER CLEAN TEXTURE -v01.STL
    • HOUSE WALLS & BASES/fd -HH2 -HOUSE TOWER ROUGH TEXTURE -v01.obj
    • HOUSE WALLS & BASES/fd -HH2 -HOUSE WALLS CLEAN TEXTURE -v01.STL
    • HOUSE WALLS & BASES/fd -HH2 -HOUSE WALLS ROUGH TEXTURE -v01.obj
    • HOUSE WALLS & BASES/fd -HH2 HOUSE PORCH BASE -v01.STL
    • LED STRIP ADPTER/fd -HH2-LED STRIP ADAPTER -v01.STL
    • MOON/f d -HH2 -MOON Lithophane -v01.stl
    • ROOF BASES & ROOFS/fd -HH2 -FLAT TOP ROOFS -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -FRONT PORCH & TOWER ROOF BASES -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -HOUSE FLAT TOP ROOF FOR MOON -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -HOUSE FLAT TOP ROOF NO MOON -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -HOUSE ROOF BASE -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -ROOFS -v01.STL
    • ROOF BASES & ROOFS/fd -HH2 -UNDER ROOF BASES -v01.STL
    • ROOF PUMPKIN/fd - HH2 -BIG PUMPKIN SUPPORT with texture -v01.obj
    • ROOF PUMPKIN/fd - HH2 -BIG PUMPKIN TOP with texture -v01.obj
    • ROOF PUMPKIN/fd - HH2 -BIG PUMPKIN with texture -v01.obj
    • SMALL PARTS/fd - HH2 -DECORATIONS -v01.STL
    • SMALL PARTS/fd - HH2 -UNDER THE PORCH DECORATIONS -v01.stl
    • SMALL PARTS/fd -HH2 -CHEMNEY CAP -v01.STL
    • SMALL PARTS/fd -HH2 -CHIMNEY -v01.STL
    • SMALL PARTS/fd -HH2 -CONSERVATORY SKYLINE -v01.STL
    • SMALL PARTS/fd -HH2 -CONSERVATORY SKYLINE FRAME -v01.STL
    • SMALL PARTS/fd -HH2 -PORCH PARTS -v01.STL
    • SMALL PARTS/fd -HH2 -STEPS -v01.STL
    • SMALL PARTS/fd -HH2 -TOWER BAT -v01.STL
    • SMALL PARTS/fd -HH2 -TOWER ROOF ROUND WINDOW FRAME -v01.STL
    • SMALL PARTS/fd- HH2 -HOUSE CORNERS -v01.STL
    • SMALL PARTS/fd- HH2 -ROOF CORNERS -v01.STL
    • WINDOWS & DOORS/fd -HH2 -FRONT & BACK DOOR -v01.STL
    • WINDOWS & DOORS/fd -HH2 -WINDOWS -v01.STL

Learn more about the formats
Last update 2024-03-25 at 12:30
Publication date 2023-08-01 at 17:36
Design number 1356956
fulv

fulv

3D printer file info

3D model description

#LAMPSXCULTS

NOTE: This is the BUNDLE version that includes the Haunted House 2 + The Haunted Hill.
I includes:
-Haunted House 2
-Haunted Hill

The Haunted House 2 is also available on its own :)

If you are interested in the commercial license please contact me for more information.

After last year's success of my original model of the Haunted House, this year I have decided to update the model with its own garden including a graveyard that can accommodate simple wire lights.

Designed to incorporate lights of all sorts and become a spooky lamp!

When you turn the Moon, the house and the Graveyard lights on it become stunning and look perfect for Halloween or for anytime.

It prints and goes together very easily (full step by step easy and clear instructions provided).

No need for painting any of the parts (unless you want to of course).
Just choose your favorite's spooky colors and print it!
All you need is a bit of glue:)

All the STL files are into a zipped file, organized into folders for easy navigation.

If your printer has a build plate no smaller than 204mm x 199mm x 130mm you can print all the parts as they are.
If your build plate is smaller the model can be scaled down 5% to 7%.
IMPORTANT: if you do that the color changing parts layers heights will be effected and you will need to double check the correct layers when changing the colors in your slicer).

FULLY ASSEMBLED the model is around: 280 x 360 x 400mm (with the moon) and x 450mm With the Pumpkin.

FOR THE LIGHTING:
You can use any type of small LED USB or battery operated lights.

For the graveyard I have used cheap batteries wire Christmas lights, (see pic).
For the House I have used 2 USB Toolmoon light bulbs. One with the vertical connection and one with 90Β° Connection.

The wires can be directed out of the model via the cut out at the back next to the steps of the back door.

I hope this helps.
If you have any questions, please do not hesitate to contact me and I will be more than happy to help you.

Fulv :)

Video:
https://youtu.be/a9ce4f6dlAQ

3D printing settings

All the parts in the pictures have been printed at 0.2mm layer height including the Moon and the BIG Pumpkin.
I would recommend printing the moon / BIG Pumpkin with a brim and 100% infill.

The Haunted Hill BASE parts can be printed at 0.3 layers Height if you prefer.

Filament of choice:
Polymaker PLA

Pdf documents with the list of colors / material used provided.

Slicer: CURA and PRUSA Slicer

The longest print is the House main walls (about 20 hours).
All the other parts take much less time.
If your printer has a build plate no smaller than 204mm x 199mm x 130mm you can print all the parts as they are.

If your build plate is smaller the model can be scaled down 5% to 7%.
IMPORTANT: if you do that the color changing parts layers heights will be effected and you will need to double check the correct layers when changing the colors in your slicer).

Categories

Designs β€Ί Various β€Ί Dioramas / Seasonal & celebrations / Education

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.